The Best Valid 220-1001 Dumps for Helping Passing 220-1001 Exam!
UPDATED CompTIA 220-1001 Exam Questions & Answer
The CompTIA 220-1001 exam is an essential step towards achieving the CompTIA A+ certification. It is a comprehensive exam that covers a wide range of IT topics and requires a solid understanding of hardware, networking, and troubleshooting techniques. With this certification, individuals can demonstrate their skills and knowledge to potential employers, increasing their chances of landing entry-level IT positions.
Which Jobs Require CompTIA A+ Training?
After gaining the CompTIA A+ certification, many companies will be ready to give you a chance to be part of their team. And this is the perfect opportunity to demonstrate your capabilities. From Dell to Ricoh, HP, and Nissan, it's indeed common for globally respected companies to go all out to secure the services of A+ certified IT specialists to fill the following roles:
- Help Desk Technician;
- System Support Specialist;
- Desktop Support Administrator;
- Associate Network Engineer;
NEW QUESTION # 216
A customer, Ann, has requested two custom PCs, one to be used for gaming and the other to be used as a virtualization workstation for her business.
The gaming PC should support the latest games and gaming peripherals.
The virtualization workstation should be able to host several production virtual machines as part of Ann's home business.
INSTRUCTIONS
Use the tabs at the top to switch between the PCs.
Objects should be placed on the appropriate slot/display areas and can only be used once.
All slot/display areas should be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
NEW QUESTION # 217
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company's WLAN as all e-mail services are on default non-secure ports.
The company's WLAN is broadcasting across the company for easier access. Both incoming and outgoing servers require login credentials.
Use the following parameters:
* Email address tech@techies com
* Password P@SSwOrd
* Pop techies com Port 110 Security. None
* IMAP techies com Port 993 Security SSL
* smtp.techies.com Port 465 Security: TLS
* Company SSID Techies
* Security WPA2
* Passphrase P@SSwOrd
* SSID is not broadcasted
Answer:
Explanation:
INSTRUCTIONS:
Update the mobile device's parameters to fit the criteria.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
See explanation below
NEW QUESTION # 218
A user is working on a company laptop at an airport and needs to update and email a confidential file with sensitive information. To which of the following should the user connect in order to send the message security?
- A. Mobile phone hospot
- B. Bluetooth pairing
- C. Airport WlFi
- D. Company VPN
Answer: D
NEW QUESTION # 219
SIMULATION
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company's WLAN as all e-mail services are on default non-secure ports.
The company's WLAN is broadcasting across the company for easier access.
Users must authenticate to the server with the same credentials in order to send and receive email.
Authentication should be enforced in the settings of the mobile device using the following parameters:
* Username: [email protected]
* Password: P@$$w0rd
* Outgoing server: mail.techies.com
* Incoming server: pop3.techies.com
* Company SSID: Techies
* Security Key: CA:FE:33:71:00
INSTRUCTIONS:
Update the mobile device's parameters to fit the criteria and support the strongest encryption available.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
- A. For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.
For Email setup, choose the following:
- B. For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.
For Email setup, choose the following:
Answer: B
NEW QUESTION # 220
A technician Is building out a small retail shop. The owner wants an the cash registers to remote Into a server in the back of the shop rather than running an OS locally. Which of the following should the technician install for the registers?
- A. Laptops with docking stations
- B. Portable mobile devices
- C. Touch screen kiosks
- D. Thin clients
Answer: A
NEW QUESTION # 221
Which of the following cables can carry both a digital and an analog signal?
- A. HDMI
- B. DVI-I
- C. DisplayPort
- D. DVI-D
Answer: D
NEW QUESTION # 222
A technician identifies an incorrectly terminated network cable as the cause of intermittent network drops.
Which of the following tools should the technician use to determinate the network cable?
- A. A loopback plug
- B. A cable tester
- C. A multimeter
- D. A crimper
Answer: D
NEW QUESTION # 223
An IT manager discovered that hundreds of pages of printed materials are being recycled each day because the materials are left on the printer tray instead of being picked up by users.
Which of the following would BEST prevent this waste?
- A. Send friendly reminders to not print unnecessarily.
- B. Enable duplex printing to reduce paper utilization.
- C. Require a code or badge before releasing a print job.
- D. Bill each department for the excess material cost.
Answer: D
NEW QUESTION # 224
An IT vendor gives a technician the following address on a support call: 192.168.15.2/32. Which of the following BEST describes the address provided by the vendor?
- A. IPv6 address in subnet mask format
- B. IPv6 address in CIDR format
- C. IPv4 address in subnet mask format
- D. IPv4 address in CIDR format
Answer: D
NEW QUESTION # 225
A systems administrator receives a notification from the RAID controller that the RAID 5 array is degraded.
Upon logging into the server, the administrator sees that on local disk 0, physical disk 2 has failed. Which of the following is the BEST course of action to take to resolve the problem?
- A. Delete logical disk 0 and manually configure a new RAID array only using the known-good working drives. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
- B. Immediately replace physical disk 2. Wait until the arrays is rebuilt and confirm in the RAID controller that the system is no longer degraded.
- C. Schedule system downtime and replace physical disk 2. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
- D. In the controller, convert the RAID 5 array to RAID 0 array to avoid system downtime. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
Answer: C
NEW QUESTION # 226
A user connects to a wireless network but cannot access the Internet. A technician investigates the issue and gathers the following data:
Which of the following is the MOST likely cause of the issue?
- A. The frequency is incorrect for 802. 11ac wireless,
- B. WPA2 passwords require A-Z characters and must be more than ten characters long.
- C. The SSID cannot have an exclamation point or an asterisk in it.
- D. The signal strength is too low for a high-quality connection.
- E. The subnet mask is incorrect for the IP address.
Answer: C
NEW QUESTION # 227
Acustomer reports being unable to display a presentation on an external monitor. A technician is dispatched to troubleshoot the issue and discovers it will display on a different external monitor.
The new monitor has 4K native resolution, while the old one has full HD native resolution. Both monitors work fine while connected to another computer. Which of the following procedures should the technician try FIRST?
- A. Replace the external monitor cable.
- B. Configure to display in mirroring mode.
- C. Perform a full system reinstallation.
- D. Adjust the resolution.
Answer: D
NEW QUESTION # 228
A user powers on a desktop computer and the following error appears on the monitor: is not found. The user notes there are no visual indications of an error. A reboot yields the same result. Which of the following is the MOST likely cause of the issue?
- A. A USB flash drive that contains offline diagnostics is plugged in.
- B. The boot order has changed.
- C. The CD-ROM drive contains a Windows setup disk.
- D. The system partition is set to active.
Answer: B
NEW QUESTION # 229
A technician was called to check an unexpected clicking noise on a desktop that has become more frequent every time a video editing application is loaded.
The system fans have been replaced, but the clicking noise remains.
Diagnostics have been run on the video card.
Which of the following should me the technician do FIRST?
- A. Perform a full data backup.
- B. Scan the system for viruses.
- C. Do a System Restore.
- D. Replace the hard drive.
- E. Replace the video card.
Answer: A
NEW QUESTION # 230
A technician recently replaced a power supply In a user's PC. Since then, the PC powers off immediately and provides no feedback when the user launches certain applications. This occurs consistently after reboots.
Which of the following is the MOST likely cause of the issue?
- A. A damaged connector
- B. A faulty electrical outlet
- C. Insufficient waltage
- D. Faulty RAM
Answer: B
NEW QUESTION # 231
A user experiences a paper jam when printing a 500-page, double-sided report. A technician .... then powers the printers off and back on. The printer's LCD display says it is ready, and all cables are securely connected, The user attempts to print the report again. but the printer still does not print....... troubleshooting steps should the technician attempt FIRST?
- A. Remove the printer memory and reseat it in the socket.
- B. Replace the drum and loner for the printer.
- C. Try reinstalling the print driver tor the printer
- D. Restart the print spooler service and inspect the queue.
- E. Disassemble the printer body and look for further paper jams.
Answer: A
NEW QUESTION # 232
......
The CompTIA 220-1001 is the first test that candidates must pass to obtain the CompTIA A+ certificate that will help them start a career in IT.
Updated 220-1001 Dumps Questions For CompTIA Exam: https://www.examslabs.com/CompTIA/A/best-220-1001-exam-dumps.html
Latest Success Metrics For Actual 220-1001 Exam Realistic Dumps: https://drive.google.com/open?id=17up8tBdXhBYgyw59nFXw8hXsjzULt-eM