220-1001 Questions Pass on Your First Attempt Dumps for A+ Certified [Q329-Q349]

Share

220-1001 Questions Pass on Your First Attempt Dumps for A+ Certified

220-1001 Practice Test Pdf Exam Material

NEW QUESTION # 329
A user is having issues with a smartphone that will not make calls; however, the user can browse the Internet with WiFi. Which of the following is MOST likely to cause of this issue?

  • A. GPS turned on
  • B. Bluetooth is off
  • C. Airplane mode on
  • D. Cellular turned off

Answer: D


NEW QUESTION # 330
A technician is configuring a new web server and must have over 10TB of fault-tolerant storage, while minimizing the number of failure points. The applications on the server also require the highest performance available. Which of the following configurations would the technician MOST likely select?

  • A. RAID 5 with 7200rpm 5TB drives
  • B. RAID 0 with 15000rpm 15TB drives
  • C. RAID 10 with 5400rpm 6TB drives
  • D. RAID 1 with 10000rpm 8TB drives

Answer: C

Explanation:
Explanation/Reference:


NEW QUESTION # 331
A customer, Ann, has requested two custom PCs, one to be used for gaming and the other to be used as a virtualization workstation for her business.
The gaming PC should support the latest games and gaming peripherals.
The virtualization workstation should be able to host several production virtual machines as part of Ann's home business.
INSTRUCTIONS
Use the tabs at the top to switch between the PCs.
Objects should be placed on the appropriate slot/display areas and can only be used once.
All slot/display areas should be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Answer:

Explanation:

Explanation


NEW QUESTION # 332
A user experiences a paper jam when printing a 500-page, double-sided report. A technician .... then powers the printers off and back on. The printer's LCD display says it is ready, and all cables are securely connected, The user attempts to print the report again. but the printer still does not print....... troubleshooting steps should the technician attempt FIRST?

  • A. Disassemble the printer body and look for further paper jams.
  • B. Replace the drum and loner for the printer.
  • C. Try reinstalling the print driver tor the printer
  • D. Restart the print spooler service and inspect the queue.
  • E. Remove the printer memory and reseat it in the socket.

Answer: D


NEW QUESTION # 333
Which of the following wireless standards provides the HIGHEST bandwidth?

  • A. 802.11b
  • B. 802.11a
  • C. 802.11ac
  • D. 802.11g

Answer: C


NEW QUESTION # 334
A technician needs to install a PSU into a desktop The required wattage is 420W Which of the following power supply sizes should the technician install to meet the minimum power requirement?

  • A. 500W
  • B. 400W
  • C. 220W
  • D. 800W

Answer: A


NEW QUESTION # 335
Which of the following cloud computing concepts allows scalable services to be provided to the client?

  • A. On-demand
  • B. Rapid elasticity
  • C. Metered
  • D. Resource pooling

Answer: B


NEW QUESTION # 336
Ann, a user, reports that after setting up a new WAP in her kitchen she is experiencing intermittent connectivity issues. Which of the following should a technician check FIRST?

  • A. Antenna power level
  • B. Channels
  • C. Frequency
  • D. SSID

Answer: B


NEW QUESTION # 337
A technician is trying to identify the reason why a user, who has a static IP address, is unable to browse the Internet. the technician runs the ipconfig command and gets the following:

The technician then runs the tracert 8,8,8,8 command and gets the following:

Which of the following is the MOST likely issues he user is having?

  • A. The user has an APIPA IP address configured
  • B. The wrong subnet mask is configured
  • C. There is a problem with a network switch.
  • D. There is a problem with a network router

Answer: B


NEW QUESTION # 338
A customer's workstation will not boot. A technician runs diagnostics on the system and discovers it is set up in a RAID 0 configuration, and a single SATA hard drive has failed. The system was set up for performance. Once repaired, the customer requests redundancy be built into the system and an increase in performance. Which of the following describes how the technician should set up the new RAID configuration?

  • A. RAID 10 configuration utilizing new HDD
  • B. RAID 5 configuration that will allow the loss of a hard drive without failure
  • C. RAID 6 configuration that will allow the loss of two hard drives without failure
  • D. RAID 1 configuration that will utilize new SSD

Answer: A


NEW QUESTION # 339
A user is not receiving emails on a laptop. A technician is able to send emails using the local client, however no new emails are being received. The POP3 and SMTP settings in the corporate email configuration look correct. The technician notices a new antivirus program was installed on the machine recently. Which of the following is MOST likely causing the program?

  • A. The user is not connected to the internet
  • B. The user needs to enable TLS
  • C. The POP3 port is being blocked
  • D. The email password stored is incorrect

Answer: C


NEW QUESTION # 340
A technician recently installed a new router. Since the installation was completed, a user's PC loses network connectivity when another user's PC comes online. Which of the following commands are BEST for the technician to run to resolve this issue? (Select TWO).

  • A. ipconfig /registerdns
  • B. ipconfig /renew
  • C. ipconfig /all
  • D. ipconfig /displaydns
  • E. ipconfig /release
  • F. ipconfig /flushdns

Answer: B,E


NEW QUESTION # 341
A user is giving a presentation for the third time in a single day to off-site customers. Each time the VGA output was used successfully. While preparing for another meeting, the laptop is connected to a projector and the laptop displays an incompatible VGA mode error. Which of the following could be the cause?

  • A. The laptop is forcing a resolution that is too low
  • B. The projector does not support extended display mode
  • C. The graphic card in the laptop does not support VGA
  • D. The laptop is forcing a resolution that is too high

Answer: D


NEW QUESTION # 342
A technician creates a VM in a public cloud to test a new application and then deletes the VM when finished. Which of the following BEST describes this type of cloud environment?

  • A. Community
  • B. On-demand
  • C. Elastic
  • D. Hybrid

Answer: B


NEW QUESTION # 343
A technician has noticed that when at company headquarters the laptop connection to the Internet is more responsive than when using the company-provided phone as a hot-spot. The technician updated the drivers on the WiFi NIC without resolution and then verified the configuration on the WiFi was correct.
Which of the following configurations could cause the decreased performance?

  • A. SSID is not found.
  • B. The connection if throttled.
  • C. It is out of range.
  • D. There is a low RFID signal.

Answer: B


NEW QUESTION # 344
Which of the following IP addressing types is MOST likely to use an IP address starting with 169.254?

  • A. APIPA
  • B. Dynamic
  • C. Static
  • D. Link local

Answer: A


NEW QUESTION # 345
A developer has configured a new web application on a workstation using client-side virtualization. Despite working locally on the developer's PC, other users on the network are not able to access the application.
Which of the following network configurations should the virtual machine be configured for to allow other users to access the application?

  • A. Private networking
  • B. Bridged networking
  • C. Internal networking
  • D. NAT networking

Answer: B


NEW QUESTION # 346
A client needs to upgrade the hard drive on a laptop and would like one that is fast and has drop protection. Which of the following is the BEST option for the client?

  • A. 7200rpm HDD
  • B. Hybrid HDD/SSD
  • C. NVMe SSD
  • D. 5400rpm HDD

Answer: C


NEW QUESTION # 347
Users of an older laser printer notice the printing on output is easily scratched off the paper. Which of the following is the MOST likely root cause?

  • A. The toner cartridge contains old toner.
  • B. The corona wire is defective and needs to be replaced.
  • C. The fuser assembly is not reaching the correct temperature.
  • D. The paper in the trays has been exposed to moist air.

Answer: C

Explanation:
Reference: http://resources.lasertekservices.com/what-is-a-printer-fuser-unit/


NEW QUESTION # 348
A user logs on a PC and receives a message stating there is a duplicate IP address on the network. After
a system restart, the user notices the same error.
Which of the following is the MOST probable cause of the error?

  • A. The user has set a static IP address.
  • B. The user is still logged into another device.
  • C. The user has moved to a different office.
  • D. The user has wireless and wired connections.

Answer: A


NEW QUESTION # 349
......

220-1001 [Jul-2023] Newly Released] Exam Questions For You To Pass: https://www.examslabs.com/CompTIA/A/best-220-1001-exam-dumps.html

220-1001 Answers 220-1001 Free Demo Are Based On The Real Exam: https://drive.google.com/open?id=17up8tBdXhBYgyw59nFXw8hXsjzULt-eM