Full NS0-184 Practice Test and 60 unique questions with explanations waiting just for you!
NCSIE ONTAP Dumps NS0-184 Exam for Full Questions - Exam Study Guide
NEW QUESTION # 12
Click the Exhibit button.
Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
- B. Move Epsilon to cluster1-02, then remove the node.
- C. Remove the node, then the cluster will elect a new master to remain in quorum.
- D. Verify that high availability is configured for failover to the HA partner, then remove the node.
Answer: B,D
NEW QUESTION # 13
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither "un-failing" nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)
- A. Ask the customer to open a technical case with NetApp Support.
- B. Power off the system until the drive has been replaced.
- C. Run Active IQ Config Advisor to collect all the logs on the system.
- D. Ask the customer for a drive with the same capacity and replace it.
Answer: C,D
NEW QUESTION # 14
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 15
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. Config Advisor output
- B. NetAppDocs output
- C. Active IQ Unified Manager output
- D. Active IQ OneCollect output
Answer: A
NEW QUESTION # 16
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)
- A. EMS
- B. banner
- C. AutoSupport
- D. motd
Answer: B,C
NEW QUESTION # 17
You are using Broadcom BES-53248 switches for a cluster interconnect in a base configuration.
In this scenario, what is the minimum number of ISLs supported between the switches?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 18
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?
- A. Peering authentication status can be verified with the cluster peer show command.
- B. Peering authentication can be configured using LDAP users and groups.
- C. Peering authentication can use an ONTAP generated passphrase.
- D. Peering authentication is required before enabling peering encryption.
Answer: A,C
NEW QUESTION # 19
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 20
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. node management LIF
- B. cluster LIF
- C. data LIF
- D. cluster management LIF
Answer: A
NEW QUESTION # 21
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view telemetry dat
a. The customer also wants to receive online information about any risks with the cluster and potential best-practice gaps.
Which tool satisfies the customer's requirements?
- A. Spot by NetApp
- B. Active IQ Digital Advisor
- C. Cloud Manager
- D. Interoperability Matrix Tool
Answer: B
NEW QUESTION # 22
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
- A. You can change any drives or disk shelves as part of this replacement procedure.
- B. A controller model of the same type must be used to replace the impaired node.
- C. You must move the boot device from the impaired node to the replacement node.
- D. The boot device must remain intact and must not be removed from the impaired node.
Answer: B,C
NEW QUESTION # 23
You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)
- A. Brocade SAN Health
- B. Cisco Data Center Network Manager (DCNM)
- C. Active IQ
- D. Active IQ Config Advisor
Answer: B,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modular-system/flex-pod-datacenter-ucs-intersight.html
NEW QUESTION # 24
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)
- A. performing database application data migrations
- B. logging the customer support calls
- C. accessing internal NetApp KB articles
- D. registering for access to the NetApp Support site
Answer: A,D
NEW QUESTION # 25
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. thin provisioning
- B. FlashCache
- C. FlexClone volumes
- D. Flash Pool
Answer: B,D
NEW QUESTION # 26
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. At least one LIF per node is required on each cluster.
- B. The LIFs must use the default intercluster service policy.
- C. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
- D. The LIFs must be in dedicated broadcast domains an IPspaces.
Answer: B,D
NEW QUESTION # 27
You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?
- A. a0a-100
- B. e0e
- C. e0e-100
- D. a0a
Answer: B
NEW QUESTION # 28
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. password
- B. node management IP
- C. cluster management IP
- D. Advanced Drive Partitioning
- E. intercluster IP
Answer: B,C,E
NEW QUESTION # 29
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use the cluster image package get and cluster image update commands.
- B. Use ONTAP System Manager to download and install the new software image.
- C. Use ONTAP System Manager to upload and install the new software image.
- D. Use a USB drive with the new software image and let ONTAP automatically boot.
Answer: A,B
NEW QUESTION # 30
......
Authentic Best resources for NS0-184 Online Practice Exam: https://www.examslabs.com/NetworkAppliance/NCSIE-ONTAP/best-NS0-184-exam-dumps.html
Get the superior quality NS0-184 Dumps Questions from ExamsLabs: https://drive.google.com/open?id=1Mz_6rverva8yuQg-enXwPpkKDa80Gazo