Contact Us
Login / Register

Home
All Vendors
Guarantee
FAQ
Free Dumps
Cart (0)

USGBC LEED AP Building Design + Construction (LEED AP BD+C) - LEED-AP-BD-C Exam Practice Test

Page: 1 / 32
Total 407 questions

Please signup / login to view this exam, then you will be able to view the entire exam for free.

Get Full Access Now

Question 1

For Energy and Atmosphere Credit, Advanced Energy Metering, what is the minimum percentage requirement for metering any individual energy end uses?

A. Those that represent 20% or more of the total annual consumption of the building B. Those that represent 15% or more of the total annual consumption of the building C. Those that represent 25% or more of the total annual consumption of the building D. Those that represent 10% or more of the total annual consumption of the building

Correct Answer: D

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 2

To ensure long-term energy efficiency and grid resilience, which strategy should the project team prioritise first?

A. Purchase 100% Renewable Energy Certificates to offset projected electricity use B. Enrol in a demand-response programme with the local utility C. Provide a high-performance building envelope

Correct Answer: C

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 3

What supporting material is required for all LEED Building Design and Construction projects in order to document Location and Transportation Credit, Bicycle Facilities for the bicycle network?

A. Photographs of the installed bicycle storage and shower facilities B. Manufacturer specifications for the chosen bicycle storage facilities, including the number of bicycles supported by each bike rack C. Vicinity map showing bicycle network, route and distance along network to eligible destination(s) D. Photographs of bicycle network signage and directional signposts

Correct Answer: C

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 4

Several Materials and Resources credits give a bonus location valuation factor, which allows products extracted, manufactured and produced within 100 mi. (161 km) of the project to take double valuation in credit calculations. The intent of this bonus is

A. to shorten construction duration by reducing shipping times B. to promote design with indigenous materials in order to maintain local aesthetic quality C. to avoid spreading products with potentially invasive non-native pests D. to incentivize the purchase of products that support the local economy

Correct Answer: D

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 5

For Energy and Atmosphere Credit, Advanced Energy Metering, what is the minimum amount of time that the metering system should store data?

A. 24 months B. 36 months C. 6 months D. 12 months

Correct Answer: B

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 6

For schools intended for grades eight and below (or ages 14 and below), which of the following scenarios would demonstrate compliance with Location and Transportation Credit, Access to Quality Transit, Schools, Option 2. Pedestrian Access?

A. 30% of the students live no more than a 1 1/2 mi. (2.40 km) walking distance from a functional entry of a school building B. 30% of the students live no more than a 3/4 mi. (1.20 km) walking distance from a functional entry of a school building C. 50% of the students live no more than a 3/4 mi. (1.20 km) walking distance from a functional entry of a school building D. 50% of the students live no more than a 1 1/2 mi. (2.40 km) walking distance from a functional entry of a school building

Correct Answer: C

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 7

A project team wants to educate the facility manager on the installed building systems to improve Indoor Environmental Quality. They want the facility manager to maintain the systems so that they will continue to function as intended. Which of the following should be provided to the facility manager?

A. A copy of the credit documentation for the credits that were approved by Green Business Certification Inc. (GBCI) B. As-built drawings and copies of material submittals C. Vendor invoices for mechanical equipment D. Preventive maintenance plan for the building

Correct Answer: D

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 8

A project's installed water fixtures do not exceed WaterSense maximum levels. Which compliance path should the LEED AP select under Water Efficiency Prerequisite, Indoor Water Use Reduction, and what type of documentation is required to demonstrate compliance with this path?

A. Compliance Path 1: Prescriptive Achievement; indoor water use calculations B. Compliance Path 2: Usage-Based Calculation; appliance water calculations C. Compliance Path 2: Usage-Based Calculation; prescriptive compliance confirmation D. Compliance Path 1: Prescriptive Achievement; product cutsheets

Correct Answer: D

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 9

What is the maximum walking distance allowed between short-term bicycle storage and a main entrance according to LTc4: Transportation Demand Management?

A. 600 ft. (182.88 m) B. 400 ft. (121.92 m) C. 800 ft. (243.84 m)

Correct Answer: A

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 10

Water Efficiency Prerequisite, Outdoor Water Use Reduction, Option 2. Reduced Irrigation, requires that a project's landscape water requirement be reduced by what percentage from the calculated baseline for the project site's peak watering month?

A. 20% B. 30% C. 40% D. 25%

Correct Answer: B

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 11

Which system is eligible for the Energy and Atmosphere Credit, Renewable Energy Production?

A. Passive solar and daylighting strategies B. Municipal solid waste combustion C. Ground-source heat pumps D. Tidal-based electrical production

Correct Answer: D

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 12

When using the Integrative Process, what is the best way for the LEED AP to assess the impact of indoor and outdoor water consumption in a Building Design and Construction project?

A. Estimate consumption by using 20 gal. per day (76 I per day) for each Full Time Equivalent (FTE) scheduled to occupy the building B. Perform a preliminary water budget analysis before the completion of schematic design C. Install permanent metering on both the water sources and the waste water leaving the site D. At the completion of schematic design, count the fixtures and apply the maximum flow rate

Correct Answer: B

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Question 13

A LEED AP submitted a Preliminary Design and Construction review and has received a review comment and technical advice on Materials and Resources Prerequisite, Construction and Demolition Waste Management Planning. Which of the following actions should the LEED AP do if the project continues to pursue LEED certification?

A. Ask the General Contractor to be more aggressive with recycling goals B. Revise the documentation and resubmit the form C. Submit an appeal to Green Business Certification Inc. D. Abandon meeting this prerequisite

Correct Answer: B

Explanation: Only visible for ExamsLabs members. You can sign-up / login (it's free).

Page: 1 / 32
Total 407 questions

Unlock all LEED-AP-BD-C features

No captcha needed
365 Days Free Updates
Set your Desired Pass Percentage
Allocate Time (Hours : Minutes)
Two Modes For LEED-AP-BD-C Practice
Customer Support

Get Full Access Now

Get in Touch

ExamsLabs

ExamsLabs's Study Materials that sold to customer will enjoy considerate after-sales service. We will provide all customers with service when they have some problems. We warmly welcome to your questions and suggestions about our Valid Dumps.

Latest Exams

H19-260_V2.0 Exam Labs
AB-100 Exam Labs
NSE5_FWB_AD-8.0 Exam Labs
C131 Exam Labs
NCP-MCI Exam Labs
SUP-2026 Exam Labs

Useful Links

All Products
FAQ
Privacy Policy
Guarantee & Refund Policy
How to buy?
About Us

Contact Us

Our Working Time: ( GMT 0:00-15:00 )
From Monday to Saturday

Support: Contact now

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Copyright © 2026 EXAMSLABS.COM. All rights reserved. All trademarks are the property of their respective owners and we don't provide actual questions from any vendor.

Disclaimer:
[PMP]®, [PMI-ACP]®, [CAPM]®, and the PMI logo are registered trademarks of PMI Corporation.
ExamsLabs does not offer exam dumps or questions from actual exams. We offer learning material and practice tests created by subject matter experts to assist and help learners prepare for those exams. All certification brands used on the website are owned by the respective brand owners. ExamsLabs does not own or claim any ownership on any of the brands.