Valid NS0-302 Test Answers & Network Appliance NS0-302 Exam PDF
Network Appliance NS0-302 Certification Real 2021 Mock Exam
How to Prepare for Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator Exam
Preparation Guide for Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator Exam
Introduction
NetApp had its start way back in 1992 when accessing the internet meant dialing up and hearing beeps, crackles, and beeps. By tech industry norms we have seen it all and we have not only survived, but weâÂÂve also thrived. We held our attention on one issue, namely the details. The controlled, collected, analyzed, secured, and transferred infrastructure continues to be enhanced. This NS0-302 exam test Certification helps a candidate to validates his skills in cloud administration.
They have succeeded in changing and rising with various cycles of transformation across history. We ran to those waves and ran like Kelly Slater. Our approach still allows our consumers to take full advantage of the opportunities of emerging technology, from the expansion of the Internet to the support for big businesses in the vertical markets, and the implementation of new systems. And we are based today in collaboration with the world’s top vendors on unlocking the latest in the cloud. Of course, even more tides of transition will fill the future. We will run to them, adapt, and grow our experience, and make it easier for others to appreciate their journey.
In this guide, we will cover the NS0-302 practice exams, Expert Certified professional salary, and all aspects of the NS0-302 practice test.
Difficulty in Writing of Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator Exam
If the applicant is not oriented or is very light on this test, they will face a wide range of difficulties when studying to be accredited as Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator, it may be very hard to write NS0-302 dumps pdf. Many of the problems may be lacking pacing, no updated research materials are available, and there is no correct course content. Both these problems now can be merged and the participants in the Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator test struggled. Both these answers have been given to the Qualification Questions Team by the experts and by the NS0-302 practice tests of the different organizations.
NEW QUESTION 30
You need to back up some of your daily Snapshot copies from ONTAP Select to Cloud Volumes ONTAP. You need to back up application-consistent Snapshot copies that are created four times daily. You also have several crash-consistent Snapshot copies that you do not want to back up to the cloud that are currently replicating.
To satisfy this requirement, which Snapshot policy parameter do you need to set on the application-consistent Snapshot copies?
- A. prefix
- B. schedule
- C. count
- D. label
Answer: B
Explanation:
Explanation/Reference: https://cloud.netapp.com/blog/aws-automatic-snapshot-copies-cvs
NEW QUESTION 31
Click the Exhibit button.
Your customer has chosen Premium Performance Tier on AWS Cloud Volume Services for a database requiring 15,000 TOPS. However, users are reporting that the database performance is very low.
Referring to the exhibit, what should you recommend?
- A. Create a second Premium Instance.
- B. Change the maximum bandwidth in the Premium Tier.
- C. Disable Data at Rest Encryption.
- D. Upgrade to the Extreme Performance Tier.
Answer: B
NEW QUESTION 32
You have an NFS export in Cloud Volumes Service, but have an application requirement for block access and SCSI-2 reservations. You need to migrate the data to a new iSCSI LUN presented to a Linux server from Cloud Volumes ONTAP. The Linux server is also running an NFS server.
In this scenario, which tool would you use to perform this task?
- A. CloudMirror
- B. Cloud Sync
- C. SnapMirror
- D. Robocopy
Answer: B
NEW QUESTION 33
When creating iSCSI LUNs on Cloud Volumes ONTAP, which two statements are true? (Choose two.)
- A. The Host Utilities should be installed on the host.
- B. You must have already created an igroup for the LUN.
- C. The Host Utilities must not yet be installed and will be configured from System Manager.
- D. You must ensure that you have an aggregate with sufficient space.
Answer: B,D
Explanation:
Explanation/Reference: https://docs.netapp.com/us-en/occm36/task_provisioning_storage.html
NEW QUESTION 34
Which two advanced SMB features are available with Cloud Volumes ONTAP 9.5? (Choose two.)
- A. workgroup authentication
- B. credit limits
- C. multichannel
- D. large MTU
Answer: D
NEW QUESTION 35
As the administrator of Cloud Insights, you installed the Acquisition Unit and configured the ONTAP Data Collector. You successfully added an ONTAP 9.5 system for monitoring. When you add another FAS system, you receive the error message shown below.
Error: "7 Mode filers are not supported"
In this situation, which statement Is correct?
- A. The communication between the Acquisition Unit and the ONTAP system gets blocked.
- B. You must configure the Data Collector for Data ONTAP /-Mode.
- C. You must use the correct admin level username and password.
- D. ONTAP Systems running In 7-Mode are not supported by Cloud Insights.
Answer: A
NEW QUESTION 36
Which two advanced SMB features are available with Cloud Volumes ONTAP 9.5? (Choose two.)
- A. workgroup authentication
- B. credit limits
- C. multichannel
- D. large MTU
Answer: C,D
NEW QUESTION 37
Your customer is using Google Cloud Interconnect to access a StorageGRID S3 bucket from applications running in Google Cloud Platform (GCP). From the private cloud router, the customer can ping any instances behind the GCP Virtual Private Cloud (VPC), but the return traffic is not routed correctly. The private cloud gateway has been defined correctly within GCP.
In this scenario, which network setting should be Investigated to help your customer solve the issue?
- A. the VLAN configuration on the private cloud switches
- B. the CIDR blocks configured on the Cloud Interconnect
- C. the maximum transfer unit (MTU) settings on the private cloud routers
- D. the Border Gateway Protocol (BGP) parameters on the private cloud routers
Answer: B
NEW QUESTION 38
You want to join AWS Cloud Volumes Service to your Active Directory environment.
Which two required fields must be completed to accomplish this task? (Choose two.)
- A. DNS Server IP Address
- B. Active Directory GPO
- C. SMB Version
- D. NetBIOS Name
Answer: A,D
Explanation:
Explanation/Reference: https://docs.netapp.com/us-en/cloud_volumes/aws/media/cvs_aws_ds_smb_setup.pdf (11)
NEW QUESTION 39
Which two network topologies would support SnapMirror data replication from Cloud Volumes ONTAP for Azure to Cloud Volumes ONTAP for AWS? (Choose two.)
- A. Virtual Private Cloud -> AWS Transit Gateway
- B. Virtual Private Cloud (VPC) -> Azure Virtual Network (VNET) peering
- C. cloud provider -> on-premises -> cloud provider VPN
- D. cloud provider -> cloud provider VPN
Answer: C,D
NEW QUESTION 40
You have an AFF A800 system with a 100 TB volume. You are using all default settings and have 4:1 storage efficiency. You are asked to replicate to a Cloud Volumes ONTAP instance for disaster recovery. The destination volume has post-process compression disabled and is set up with the MirrorAllSnapshots policy.
In this scenario, how many terabytes will be used on the Cloud Volumes ONTAP destination?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 41
You are deploying a Cloud Volumes ONTAP HA system that uses multiple Availability Zones In AWS. You want to make sure that you can access the floating IP addresses in your Virtual Private Cloud (VPC. from your other VPCs in the same AWS region in which you have deployed your Cloud Volumes ONTAP HA system.
How do you accomplish this task?
- A. Use OnCommand Systems Manager to make floating IP addresses accessible between your VPCs.
- B. Create peering between your VPCs using the AWS console.
- C. Use the AWS Transit Gateway service to create a route to your floating IP addresses.
- D. Use OnCommand Cloud Manager to make floating IP addresses accessible between your VPCs.
Answer: D
NEW QUESTION 42
Click the Exhibit button.
You have deployed Cloud Volumes ONTAP for AWS. During the deployment, you use an existing security group as shown in the exhibit. You are not able to connect NFS or SMB clients to the Cloud Volumes ONTAP Instance.
In this scenario, which two changes must be made to the security group to solve this problem? (Choose two.)
- A. Change the allowed ports to allow SMB and NFS Inbound.
- B. Change the allowed ports to allow SMB and NFS outbound.
- C. Change the source addresses to allow the 0.0.0.0/0 address.
- D. Change to a new security group with access controls according to the documentation.
Answer: C,D
NEW QUESTION 43
You are deploying Cloud Volume ONTAP HA configuration in multiple Availability Zones in AWS. You want to ensure high availability of your data if a failure occurs.
Which two steps accomplish this task? (Choose two.)
- A. Use OnCommand Systems Manger.
- B. Place Node1, Node2, and the Mediator in separate Availability Zones.
- C. Place Node1, Node2, and the Mediator in separate regions.
- D. Use OnCommand Cloud Manager.
Answer: B,D
NEW QUESTION 44
As the site reliability engineer, you have successfully deployed Kubernetes clusters on AWS and Google Cloud Platform using NetApp Kubernetes Service.
In this scenario, what would enable you to manage these clusters through a single management interface?
- A. NetApp Trident
- B. Federation
- C. Istio
- D. Helm Charts
Answer: B
NEW QUESTION 45
You are creating a Cloud Volumes Service volume In Google Cloud Platform (GCP) that serves multiprotocol SMB and NFS.
In this scenario, which two directory services are supported? (Choose two.)
- A. Linux Samba Active Directory in the tenant Virtual Private Cloud (VPC)
- B. third-party Active Directory as a Service in GCP
- C. Windows Workgroup Authentication
- D. Windows 2008r2 or later Active Directory server in the tenant Virtual Private Cloud (VPC)
Answer: A,D
NEW QUESTION 46
After deploying Cloud Volumes ONTAP in AWS, you notice a high CPU warning that is reported by Amazon CloudWatch.
In this scenario, what should you do?
- A. Upgrade Cloud Volumes ONTAP to the latest version.
- B. Ignore this warning, the alarm Is not relevant.
- C. Change the instance size to avoid this warning.
- D. Change Amazon Elastic Block Storage (Amazon EBS) disks.
Answer: A
NEW QUESTION 47
You want to create your first volume that uses Cloud Volumes Service for AWS.
Which three requirements must your AWS environment have in this scenario? (Choose three.)
- A. the mapped SMB shares from the compute engine
- B. an AWS Virtual Private Cloud (VPC)
- C. the Virtual Private Gateway (VGW) that is connected to your Virtual Private Cloud (VPC)
- D. the defined routes that include the network on which the cloud volumes run
- E. a Cloud Sync data broker
Answer: A,B,C
NEW QUESTION 48
You have designed and written applications as containers and want to deploy them on a Kubernetes cluster. You want to use Cloud Volumes ONTAP to provide dynamic persistent storage for your Kubernetes cluster.
In this scenario, what will automate this task?
- A. kubectl
- B. Terraform
- C. Istio
- D. Trident
Answer: D
NEW QUESTION 49
You are an administrator of two NetApp HCI systems In different data centers. You are asked to replicate volume data between the two data centers.
Which two requirements must be satisfied before completing this task? (Choose two.)
- A. All volumes chosen for replication must be thin provisioned in advance.
- B. You must have cluster administrator privileges to one or both clusters being paired.
- C. All management and storage networks must be routed to each other.
- D. You must have the peering license installed on both clusters.
Answer: C,D
NEW QUESTION 50
You are the administrator for your company's public cloud system. As you are deploying OnCommand Cloud Manager, you notice that each time you try to deploy a Cloud Volumes ONTAP Instance, you receive an access denied message in the log file.
In this scenario, what must you do to solve this problem?
- A. Apply the security policy from NetApp Cloud Central.
- B. Set the security permissions from the NetApp Support site.
- C. Set the security permissions from the AWS support site.
- D. Reset OnCommand Cloud Manager to the default permissions.
Answer: D
NEW QUESTION 51
You created an SMB volume in Cloud Volume Service. Before writing any data, the requirement changed to provide multiprotocol access to both NFS and SMB.
In this scenario, which action enables concurrent multiprotocol access?
- A. Change the volume service level.
- B. Create a usermap entry.
- C. Create a new Dual-protocol volume.
- D. Change the volume security style.
Answer: C
NEW QUESTION 52
As the administrator of NetApp Cloud Insights, you want to set up an alert on your on-premlses NetApp ONTAP system when a volume reaches 70% full.
In this situation, which two actions are required to accomplish this task? (Choose two.)
- A. Create a Performance Policy.
- B. Set up an alert.
- C. Monitor the action field in Auditing Events.
- D. Create an annotation for volume capacity.
Answer: B,D
NEW QUESTION 53
When you export an NFS share to an AWS EC2 instance using OnCommand Cloud Manager, which two steps in the process would it automate? (Choose two.)
- A. creating the volume
- B. exporting the volume/share to the EC2 Instance
- C. mapping the LUN to the appropriate igroup
- D. creating the LUN In the volume
Answer: B
NEW QUESTION 54
You need to set permissions to launch OnCommand Cloud Manager in AWS public cloud without using Cloud Central.
In this scenario, to ensure that OnCommand Cloud Manager can launch successfully, which action would accomplish this task?
- A. Grant permissions to the IAM User.
- B. Open a firewall rule for port 443 to my.netapp.com.
- C. Grant permissions to the account Admin User.
- D. Grant permissions to the OnCommand Cloud Manager instance.
Answer: A
NEW QUESTION 55
......
NS0-302 Exam Questions and Valid NS0-302 Dumps PDF: https://www.examslabs.com/NetworkAppliance/NetApp-Certified/best-NS0-302-exam-dumps.html