The Best NS0-516 Exam Study Material and Preparation Test Question Dumps
Get Ready to Pass the NS0-516 exam Right Now Using Our NCIE SAN E-Series Exam Package
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
NEW QUESTION 68
Where can you enter scripts in the SANtricity user interface?
- A. In the EMW on the Devices tab
- B. In the AMW on the Setup tab
- C. In the EMW on the Setup tab
- D. In the AMW on the Storage & Copy Services tab
Answer: A
NEW QUESTION 69
When you power off a storage system, which component should be powered off first?
- A. The configuration database
- B. The SANtricity client
- C. All disk shelves
- D. The controller shelf
Answer: D
NEW QUESTION 70
What is a best practice recommendation for the automated system monitor? (Choose the best answer.)
- A. It should be stopped during storage system normal operations.
- B. It should only run on one client connected to the storage system.
- C. It should run on all storage manager clients.
- D. It should only be run on Windows server systems.
- E. It should be stopped during a controller firmware upgrade.
Answer: E
NEW QUESTION 71
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)
- A. Set in the hardware tab using SANtricity System Manager
- B. Change the QSFP type in the HIC
- C. Set at the factory based on the order.
- D. Change the feature pack in the SANtricity System Manager.
Answer: B,D
NEW QUESTION 72
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. protocol errors, encoding errors, or conversion errors
- B. twisted cables, wrong plugs, or cable material
- C. faulty SFPs, cables, or patch panels
- D. wrong switch configuration
Answer: A
NEW QUESTION 73
A customer has a storage system that has been configured with multiple RAID 5 volume groups. The customer would like to reclaim capacity from the volume groups to use for a new application.
In this scenario, which action will solve this problem?
- A. Consolidate free capacity for the volume group, remove the drives that are required for the new application, and let the volume group rebuild automatically.
- B. Turn on thin provisioning for the RAID 5 volume groups to shrink the size of each volume, and then use the volume group drive removal procedure to reclaim the drives for the new application.
- C. Migrate all the data off each RAID 5 volume group, recreate the volume groups with fewer drives, and then migrate the data to the new RAID 5 volume groups.
- D. Shrink the size of the volume groups by using the volume group drive removal procedure, and then redeploy the drives as required for the new application.
Answer: C
NEW QUESTION 74
In the storage manager client, what are host groups? (Choose the best answer.)
- A. Two or more disk devices joined together
- B. A set of I/O hosts with access to the same set of volumes.
- C. Volumes linked to update at the same time
- D. Two or more servers that host localcache.
- E. A custom group of virtual machine hosts
Answer: E
NEW QUESTION 75
All non-I/O related activity on the storage system is recorded in the _____________. (Choose the best answer.)
- A. NVSRAM
- B. DACstore
- C. Storage Array Profile
- D. Event Log
- E. Cache backup device
Answer: B
NEW QUESTION 76
With ALUA support, how does the storage system handle I/Os to the non-preferred path? (Choose the best answer.)
- A. The non-owning controller takes ownership of the volume in order to handle them, then restores ownership to the original controller.
- B. They are shipped over to the owning controller to be managed, then returned through the non-preferred path after completion.
- C. They are rejected with a specific SCSI check condition.
- D. The controller handles them normally, updating both controllers' cache to maintain consistency, which is why ALUA requires cache mirroring to be enabled.
- E. They are accepted but maintained in cache with a special change log, and only processed after 5 minutes when volume ownership may be changed.
Answer: B
NEW QUESTION 77
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Reinitialize the FC switch
- B. Move the connection to another controller port
- C. Swap out the FC cable
- D. Swap out the HBA on the FC switch
- E. Swap out the SFP in the controller port
Answer: A,C,E
NEW QUESTION 78
What measurement refers to the number of read/write requests that can be handled in a 1-second time period? (Choose the best answer.)
- A. Parity
- B. Read modify write
- C. I/O alignment
- D. IOPS
- E. Throughput
Answer: D
NEW QUESTION 79
Your company has an E-Series system connected to Cisco MDS switches. You are asked to provision a volume on a new Windows host, but the Windows host is unable to connect to the volume on the E-Series system. All other Windows hosts in the fabric are able to connect to their volumes.
In this scenario, which three actions should you perform to accomplish this task? (Choose three.)
- A. Create a new virtual SAN (VSAN)
- B. Restart the switches
- C. Add a zone to the active zoneset
- D. Obtain the WWPN for the Windows HBA
- E. Create a single-initiator zone with the host and E-Series system
Answer: B,C,D
NEW QUESTION 80
Your company has deployed an E2824 and has decided to change the host protocol from iSCSI to FC You use the storage array profile to review the installed SFPs.
In this scenario, which set of supported data rates indicates that you are using dual-purpose SFPs?
- A. 25 Gbps, 10 Gbps
- B. 16 Gbps, 8 Gbps, 4 Gbps
- C. 32 Gbps, 16 Gbps, 8 Gbps, 4 Gbps
- D. 16 Gbps, 10 Gbps, 8 Gbps, 4 Gbps
Answer: D
NEW QUESTION 81
Exhibit:
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 82
Exhibit:
Which fiber cable end shown in the exhibit is supported on a NetApp E-Series system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 83
What does a lit blue SAA LED indicate?
- A. It is safe to remove the component.
- B. The component is functioning normally.
- C. Power is turned on to the component.
- D. The component has failed.
Answer: A
NEW QUESTION 84
You have two Linux hosts that must be connected over multiple paths to two NetApp E-Series systems. One with FC and the other with SAS.
In this scenario, which mutipathing driver should you use for each system to complete this task?
- A. Use LVM for FC and SAS.
- B. Use DM-MP for SAS and LVM for FC.
- C. Use DM-MP for FC and SAS.
- D. Use DM-MP for FC and LVM for SAS.
Answer: C
NEW QUESTION 85
Which alerting method would be configured using the SANtricity System Manager setup wizard?
- A. Web Services Proxy
- B. SNMP
- C. Syslog
- D. Email
Answer: B
NEW QUESTION 86
Exhibit:
Referring to the exhibit, what would you select in the search list to see all of the host selections for NetApp ESeries storage systems?
- A. E-Series Controller Firmware
- B. Storage OS
- C. SANtricity
- D. E-Series SAN Host
Answer: D
NEW QUESTION 87
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power on in any order, since the order does not matter
- B. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
- C. Power up A-side power supplies first, then power up all B-side power supplies.
- D. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
Answer: D
NEW QUESTION 88
An E2812 system, without expansion shelves, is configured with 12 Gb SAS host interface cards (HICS) and is directly connected to a host. However, the host cannot access the volumes.
In this scenario, which two troubleshooting steps should you take? (Choose two)
- A. Verify that the host can ping the E2812 system over the SAS link
- B. Verify that the E2812 SAS CHAP secret is set.
- C. Verify that the E2812 host port SAS link up lights are illuminated
- D. Verify that the correct SAS ports are in use on the E2812 system
Answer: C,D
NEW QUESTION 89
......
NetApp NS0-516 Exam Certification Details:
| Duration | 90 minutes |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Passing Score | 75% |
| Sample Questions | NetApp NS0-516 Sample Questions |
Get Special Discount Offer of NS0-516 Certification Exam Sample Questions and Answers: https://www.examslabs.com/NetworkAppliance/NCIE-SAN-E-Series/best-NS0-516-exam-dumps.html
Enhance Your Career With Available Preparation Guide for NS0-516 Exam: https://drive.google.com/open?id=1Q5I6-WHZ3oFMrawP5_fh2KeXg9eHwbYl