Prepare Important Exam with 350-401 Exam Dumps(2023)
Pass Exam Questions Efficiently With 350-401 Questions
Cisco 350-401 (Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)) Certification Exam is designed for IT professionals who want to validate their skills and knowledge in implementing and operating enterprise network technologies. 350-401 exam covers a wide range of topics, including network architecture, security, automation, virtualization, and wireless technologies. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification exam is intended for those who are seeking to become a Cisco Certified Specialist in Enterprise Core, which is an important qualification for networking professionals.
NEW QUESTION # 208
Drag and drop the LIPS components on the left to the correct description on the right.
Answer:
Explanation:
NEW QUESTION # 209
Which feature must be configured to allow packet capture over Layer 3 infrastructure'?
- A. IPSPAN
- B. VSPAN
- C. RSPAN
- D. ERSPAN
Answer: D
Explanation:
Reference:
Encapsulated remote SPAN (ERSPAN): encapsulated Remote SPAN (ERSPAN), as the name says, brings generic routing encapsulation (GRE) for all captured traffic and allows it to be extended across Layer 3 domains.
NEW QUESTION # 210
Drag and drop the descriptions from the left onto the QoS components they describe on the right.
Answer:
Explanation:
NEW QUESTION # 211
Which feature is supported by EIGRP but is not supported by OSPF?
- A. unequal-cost load balancing
- B. route filtering
- C. equal-cost load balancing
- D. route summarization
Answer: A
NEW QUESTION # 212
Refer to me exhibit.
Refer to me exhibit. The NETCONF object is sent to a Cisco IOS XE switch. What is me purpose of the object?
- A. Remove the IP address from interface GigabitEthernet1.
- B. Discover the IP address of interface GigabitEthernet.
- C. view the configuration of all GigabitEthernet interfaces.
- D. Set the description of interface GigabitEthernet1 to *1*.
Answer: C
NEW QUESTION # 213
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 214 
Refer to the exhibit. A network engineer must load balance traffic that comes from the NAT Router and is destined to 10.10.110.10, to several FTP servers. Which two commands sets should be applied? (Choose two).
A)
B)
C)
D)
E)
- A. Option B
- B. Option E
- C. Option D
- D. Option A
- E. Option C
Answer: D,E
NEW QUESTION # 215
An administrator is configuring NETCONF using the following XML string. What must the administrator end the request with?
- A. </rpc>
- B. </rpc-reply>
- C. <rpc message.id="9.0"><notificationoff/>
- D. </rpc>]]>]]>
Answer: D
NEW QUESTION # 216
Which function does a fabric edge node perform in an SD-Access deployment?
- A. Connects the SD-Access fabric to another fabric or external Layer 3 networks
- B. Connects endpoints to the fabric and forwards their traffic
- C. Encapsulates end-user data traffic into LISP.
- D. Provides reachability border nodes in the fabric underlay
Answer: B
Explanation:
Explanation
There are five basic device roles in the fabric overlay:
+ Control plane node: This node contains the settings, protocols, and mapping tables to provide the endpoint-to-location (EID-to-RLOC) mapping system for the fabric overlay.
+ Fabric border node: This fabric device (for example, core layer device) connects external Layer
3 networks to the SDA fabric.
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects wired endpoints to the SDA fabric.
+ Fabric WLAN controller (WLC): This fabric device connects APs and wireless endpoints to the SDA fabric.
+ Intermediate nodes: These are intermediate routers or extended switches that do not provide any sort of SD-Access fabric role other than underlay services.
NEW QUESTION # 217
A company plans to implement intent-based networking in its campus infrastructure. Which design facilities a migrate from a traditional campus design to a programmer fabric designer?
- A. two-tier
- B. routed access
- C. three-tier
- D. Layer 2 access
Answer: C
NEW QUESTION # 218
Refer to the exhibit.
Refer to the exhibit. A network engineer must configure a password expiry mechanism on the gateway router for all local passwords to expire after 60 days. What is required to complete this task?
- A. The password expiry mechanism is on the AAA server and must be configured there.
- B. No further action Is required. The configuration is complete.
- C. Add the aaa authentication enable default Administrators command.
- D. Add the username admin privilege 15 common-criteria*policy Administrators password 0 Cisco13579! command.
Answer: D
Explanation:
Perform this task to create a password security policy and to apply the policy to a specific user profile.
Device> enable
Device# configure terminal
Device(config)# aaa new-model
Device(config)# aaa common-criteria policy policy1
Device(config-cc-policy)# char-changes 4
Device(config-cc-policy)# max-length 20
Device(config-cc-policy)# min-length 6
Device(config-cc-policy)# numeric-count 2
Device(config-cc-policy)# special-case 2
Device(config-cc-policy)# exit
Device(config)# username user1 common-criteria-policy policy1 password password1 Device(config)# end
NEW QUESTION # 219
What is the function of a control-plane node in a Cisco SD-Access solution?
- A. to connect external Layer 3 networks to the SD Access fabric.
- B. to implement policies and communicate with networks outside the fabric
- C. to connect APs and wireless endpoints to the SD-Access fabric
- D. to run a mapping system that manages endpoint to network device relationships
Answer: D
Explanation:
Explanation
Control-Plane Nodes - Map System that manages Endpoint to Device relationships Fabric Border Nodes - A Fabric device (e.g. Core) that connects External L3 network(s) to the SDA Fabric Fabric Edge Nodes - A Fabric device (e.g. Access or Distribution) that connects Wired Endpoints to the SDA Fabric Fabric Wireless Controller - A Fabric device (WLC) that connects APs and Wireless Endpoints to the SDA Fabric Reference:
https://www.cisco.com/c/dam/m/hr_hr/training-events/2019/cisco-connect/pdf/VH-Cisco-SD-Access-Connecting
NEW QUESTION # 220
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
Explanation
Traffic Policing: Drops excessive Traffic, causes TCP retransmissions, introduce no delay/jitter Shaping: buffers, excessive traffic, introduce delay and jitter, typically delays, rather than drops traffic
NEW QUESTION # 221
Which statement describes the IP and MAC allocation requirements for virtual machines on types 1 hypervisors?
- A. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.
- B. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
- C. Each virtual machine requires a unique IP address but shares the MAC address with the physical server
- D. Each virtual machines requires a unique IP address but shares the MAC address with the address of the physical server.
Answer: B
Explanation:
Explanation
A virtual machine (VM) is a software emulation of a physical server with an operating system.
From an application's point of view, the VM provides the look
and feel of a real physical server, including all its components, such as CPU, memory, and network interface cards (NICs).
The virtualization software that creates VMs and performs the hardware abstraction that allows multiple VMs to run concurrently is known as a hypervisor.
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer 'Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes' big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
NEW QUESTION # 222
Drag and drop the descriptions from the left onto the QoS components on the right.
Answer:
Explanation:
NEW QUESTION # 223
Which line must be added in the Python function to return the JSON object {"cat_9k": "FXS193202SE")?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 224
What is a consideration when designing a Cisco SD-Access underlay network?
- A. It must support IPv4 and IPv6 underlay networks
- B. End user subnets and endpoints are part of the underlay network.
- C. Static routing is a requirement,
- D. The underlay switches provide endpoint physical connectivity for users.
Answer: D
Explanation:
ps://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#Underlay
NEW QUESTION # 225
Refer to the exhibit.
You have just created a new VRF on PE3. You have enabled debug
ip bgp vpnv4 unicast updates on PE1, and you can see the route in the debug, but not in the BGP VPNv4 table. Which two statements are true? (Choose two)
- A. After you configure route-target import 999:999 for a VRF on PE3, the route will be accepted
- B. VPNv4 is not configured between PE1 and PE3
- C. PE1 will reject the route due to automatic route filtering
- D. address-family ipv4 vrf is not configured on PE3
- E. After you configure route-target import 999:999 for a VRF on PE1, the route will be accepted
Answer: C,E
Explanation:
Explanation
Because some PE routers might receive routing information they do not require, a basic requirement is to be able to filter the MP-iBGP updates at the ingress to the PE router so that the router does not need to keep this information in memory.
The Automatic Route Filtering feature fulfills this filtering requirement. This feature is available by default on all PE routers, and no additional configuration is necessary to enable it. Its function is to filter automatically VPN-IPv4 routes that contain a route target extended community that does not match any of the PE's configured VRFs. This effectively discards any unwanted VPN-IPv4 routes silently, thus reducing the amount of information that the PE has to store in memory -> Answer 'PE1 will reject the route due to automatic route filtering' is correct.
Reference: MPLS and VPN Architectures Book, Volume 1
The reason that PE1 dropped the route is there is no "route-target import 999:999" command on PE1 (so we see the "DENIED due to: extended community not supported" in the debug) so we need to type this command to accept this route -> Answer 'After you configure route-target import 999:999 for a VRF on PE1, the route will be accepted' is correct.
NEW QUESTION # 226
Refer to the exhibit.
The inside and outside interfaces in the NAT configuration of this device have been correctly identified. What is the effect of this configuration?
- A. NAT64
- B. dynamic NAT
- C. PAT
- D. static NAT
Answer: C
Explanation:
Explanation
The command "ip nat inside source list 1 interface gigabitethernet0/0 overload" translates all source addresses that pass access list 1, which means 172.16.1.0/24 subnet, into an address assigned to gigabitethernet0/0 interface. Overload keyword allows to map multiple IP addresses to a single registered IP address (many-toone) by using different ports so it is called Port Address Translation (PAT).
NEW QUESTION # 227
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
NEW QUESTION # 228
What is an OVF?
- A. an alternative form of an ISO that Is used to install the base operating system of a virtual machine
- B. a package of files that is used to describe a virtual machine or virtual appliance
- C. a package that is similar to an IMG and that contains an OVA file used to build a virtual machine
- D. the third step in a P2V migration
Answer: B
NEW QUESTION # 229
......
To prepare for the Cisco 350-401 certification exam, candidates can take advantage of various resources provided by Cisco, including official training courses, study materials, and practice exams. These resources cover all the topics and skills tested in the exam, helping candidates to gain a deep understanding of enterprise network core technologies and master the necessary skills to pass the exam. Additionally, candidates can also join online forums and communities to connect with other IT professionals and share their knowledge and experience in the field.
350-401 Questions - Truly Beneficial For Your Cisco Exam: https://www.examslabs.com/Cisco/CCNP-Enterprise/best-350-401-exam-dumps.html
Download Cisco 350-401 Sample Questions: https://drive.google.com/open?id=13ZgLiQ_X81eobK5ti0aRFc9TKhPAKaww