[Nov-2024] HPE0-V26 Braindumps – HPE0-V26 Questions to Get Better Grades
HPE0-V26 Exam Dumps - Try Best HPE0-V26 Exam Questions - ExamsLabs
NEW QUESTION # 10
Your customer has several HPE Nimble Adaptive Flash arrays deployed in the field that are aging and need a refresh. You need to gather information to correctly size the new storage arrays. The information must include the storage IOPS, throughput, latency, storage growth, and data efficiency. What tool should you use to perform this task without deploying any software on the existing environment?
- A. HPE Assessment Foundry
- B. HPE CloudPhysics
- C. HPE OneView
- D. HPE InfoSight
Answer: D
NEW QUESTION # 11
Your customer needs help troubleshooting a Layer 3 network routing issue.
Which command should you use?
- A. snow startup-config
- B. config-router
- C. show LLDP neighbor-info
- D. traceroute
Answer: D
Explanation:
This is because the traceroute command is a network diagnostic tool that traces the route of packets across an IP network. It shows the path that packets take from the source device to the destination device and displays information such as the IP addresses of routers and switches along the path, the round-trip times of packets, and any packet loss or errors.1 It can help troubleshoot a Layer 3 network routing issue by identifying where the packets are dropped or delayed.
NEW QUESTION # 12
Match the HPE server models With the appropriate specification.
Answer:
Explanation:
* The DL20 Gen10 Plus is a flexible and affordable 15" deep server supporting the latest Intel XEON E processors12.
* The DL180 Gen10 is a secure and cost effective IP 2U server delivering flexible storage capacity, delivering a high core count, and a large memory footprint
* The DL345 is a high-density, four-socket server with high performance, scalability and reliability, all in a 2U chassis for business-critical computing performance
* The DL560 is a secure 2P 2U server delivering world-class compelling performance with the right balance of expandability and scalability
NEW QUESTION # 13
Which combination of HPE solutions can provide data validation on MSL3040 and LTO-9 cartridges?
- A. HPE Command View for Tape Libraries and HPE StoreEver Data Verification
- B. HPE Command View for Tape Libraries and Library and Tape Tools
- C. Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software
- D. HPE Command View for Tape Libraries and HPE TapeAssure Advanced
Answer: C
Explanation:
Explanation
Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software: This combination is correct, as Library and Tape Tools (L&TT) is a diagnostic tool that allows you to perform firmware upgrades, run tests, and verify data on tape devices. HPE StoreEver TapeAssure Advanced Software is a software that provides data integrity, performance, health, and utilization reports for tape drives and cartridges, and it works with L&TT to perform data verification2 .
NEW QUESTION # 14
Your customer needs to accelerate the performance Of their DL380 Gen10 servers running workloads on more active cores at higher Clock frequencies. The customer wants to know if Core Boosting will help.
What advice Should you provide?
- A. It is only supported on certain Intel processors.
- B. It is an AMD technology so it is unavailable to them
- C. It is a software solution and has performance limitations.
- D. It is only supported on ProLiant DL Gen11 servers.
Answer: A
NEW QUESTION # 15
A customer wants to set up a site-to-site replication using Fibre Channel to a Site that is 10 Kilometers away.
What cable must be used to achieve this?
- A. Single-mode fiber optic cable
- B. Multimode fiber optic cable
- C. Flex fiber cable
- D. Polymer optical fiber cable
Answer: A
Explanation:
Explanation
* https://en.wikipedia.org/wiki/Fibre_Channel
* https://www.techtarget.com/searchnetworking/tutorial/Network-cable-history-and-fundamentals-Cabling-t
* https://fibrechannel.org/wp-content/uploads/2016/04/Fibre_Channel_Connectivity_White_Paper_04-06-16 This is because single-mode fiber optic cable has a small core diameter that allows only one mode of light to propagate. This reduces signal attenuation and enables longer transmission distances than multimode fiber optic cable, which has a larger core diameter that allows multiple modes of light to propagate. Single-mode fiber optic cable can support distances up to 40 kilometers for Fibre Channel applications.
NEW QUESTION # 16
Match the correct scaling approach to each strategy
Answer:
Explanation:
Explanation
* Scale-out: Add more servers to do the workload
* Scale-up: Add more resources (such as processors and memory) to existing servers
* Scale-out: Add an additional two-socket system to an existing VMware Cluster
* Scale-up: Add two additional processors to a four-socket system currently equipped with only two processors This is because:
* Scale-out: This is a scaling approach that involves adding more servers or nodes to a system to increase its capacity and performance. It is also known as horizontal scaling. It can help distribute the workload across multiple servers and improve availability and fault tolerance.
* Scale-up: This is a scaling approach that involves adding more resources (such as processors, memory, storage or network) to an existing server or node to increase its capacity and performance. It is also
* known as vertical scaling. It can help improve the performance of a single server and reduce the complexity of managing multiple servers.
NEW QUESTION # 17
Match the protocol to a fundamental approach for storing data. (Each option may be used once, more than once, or not at all.)
Answer:
Explanation:
Explanation
* NAS: c) Sharing files over industry standard protocols such as NFSv4 or SMB.
* SAN: a) Block access using a FC protocol. or b) Block access using FCoE protocol or d) Block access using the iSCSI protocol.
According to the HPE website, NAS stands for Network Attached Storage and is a storage system that provides file-level access to data over a network. NAS devices use protocols such as NFSv4 or SMB to share files with clients. NAS devices typically have their own file system and operating system and can support multiple users and applications.
SAN stands for Storage Area Network and is a network that provides block-level access to data over a dedicated network. SAN devices use protocols such as FC, FCoE, or iSCSI to transfer blocks of data to servers. SAN devices do not have their own file system and rely on the servers to manage the data. SAN devices typically provide high performance and availability for mission-critical applications.
NEW QUESTION # 18
Which license is needed in an HPE SimpliVity environment where automata disaster recovery capabilities are required?
- A. Veeam Backup & Replication
- B. VMware Site Recovery Manager
- C. HPE Peer Persistence
- D. HPE RapidDR
Answer: D
Explanation:
Explanation
HPE RapidDR: This license is correct, as HPE RapidDR is a disaster recovery orchestration tool that automates the failover of a pre-configured set of virtual machines from a production site to a recovery site on HPE SimpliVity. It leverages the built-in backup and replication capabilities of HPE SimpliVity and simplifies the disaster recovery process.
HPE SimpliVity is a hyperconverged infrastructure solution that combines compute, storage, networking, and data services in a single platform. It provides high performance, efficiency, and resiliency for various workloads, including edge, VDI, and general virtualization
NEW QUESTION # 19
Your customer needs to capture, store, manage, and analyze a dataset that exceeds capacity of typical database software tools.
What storage technology should you propose to meet their needs?
- A. File Storage
- B. Containers
- C. Block Storage
- D. Big Data
Answer: D
Explanation:
According to Simplilearn, big data storage is a new technology that allows you to store large amounts of data that exceed the capacity of typical database software tools. Big data storage can handle various types of data, such as structured, unstructured, or semi-structured data, and provide fast and scalable access to it.
NEW QUESTION # 20
Your customer needs to accelerate the performance Of their DL380 Gen10 servers running workloads on more active cores at higher Clock frequencies. The customer wants to know if Core Boosting will help.
What advice Should you provide?
- A. It is only supported on certain Intel processors.
- B. It is an AMD technology so it is unavailable to them
- C. It is a software solution and has performance limitations.
- D. It is only supported on ProLiant DL Gen11 servers.
Answer: A
Explanation:
Core Boosting technology uses a relaxed and optimized turbo profile that adapts the processor to specific use cases, configurations, and environments. Core Boosting processors take advantage of extra server power and thermal headroom provided by an innovative HPE voltage regulator design and by cooling technologies. Consequently, systems that have Core Boosting processors can alleviate common setbacks and maximize processor computing power. However, Core Boosting option is only supported in ProLiant Gen10 servers with certain Intel processors.
NEW QUESTION # 21
An HPE ProLiant DL380 Gen10 Plus server had a power supply issue, and it failed to alert the customer and create a case With HPE support.
What additional step is required to activate this feature?
- A. Add the server to the existing ILO 5 Federation
- B. Apply the ILO 5 Advanced License
- C. Connect the server to an HPE Remote Support Host Server
- D. Enable the Remote Console within iLO 5
Answer: C
Explanation:
This is because HPE Remote Support is a service that provides proactive and reactive support for HPE servers, storage, and networking products. It enables automatic fault detection and diagnosis, remote troubleshooting, and case creation and management. To use this service, the server must be connected to an HPE Remote Support Host Server, which is a server that runs the HPE Remote Support software and communicates with the HPE Support Center
NEW QUESTION # 22
Your customer wants a new server tor a File & print workload.
What are the most important factors to consider? (Select two.)
- A. support level
- B. power supply wattage
- C. transfer rate
- D. form factor
- E. storage capacity
Answer: D,E
Explanation:
Explanation
This is because a file and print workload requires a server that can store and share large amounts of data with multiple users and devices. Therefore, the server should have enough storage capacity to meet the current and future data needs of the customer. The form factor of the server also matters because it determines how much space the server occupies and how easy it is to install and maintain. Depending on the customer's preferences and constraints, they may choose a tower, rack or blade server.
NEW QUESTION # 23
A customer needs an open-source container orchestration system that supports cloud-native applications area provides support for containers with persistent storage at the same time.
Which platform should you recommend?
- A. Hadoop
- B. openstack Neutron
- C. Kubernetes
- D. Hortonworks Data Platform
Answer: C
Explanation:
Kubernetes is an open-source system for automating deployment, scaling, and management of containerized applications. It groups containers that make up an application into logical units for easy management and discovery. Kubernetes supports cloud-native applications that are designed to run on distributed and dynamic environments.
Kubernetes also supports containers with persistent storage by providing various options such as:
- Persistent Volumes: These are abstracted storage resources that can be provisioned by administrators and consumed by users without worrying about the underlying storage implementation.
- Persistent Volume Claims: These are requests for storage by users that can be dynamically or statically bound to Persistent Volumes.
- Storage Classes: These are ways to describe different kinds of storage offered by a cluster, such as SSD or HDD, performance or capacity, etc.
- Volume Snapshots: These are point-in-time copies of Persistent Volumes that can be used for backup or restoration purposes.
- Container Storage Interface: This is a standard interface that allows Kubernetes to communicate with various storage vendors and plugins.
NEW QUESTION # 24
Your customer is using HPE Infosight in their environment containing ProLiant and MSA systems.
Which product supports automatic case creation through InfoSight?
- A. ProLiant DL560 Gen10
- B. MSA2040
- C. MSA2062
- D. ProLiant DL120 G7
Answer: A
Explanation:
Automaticc case creation - This feature is only supported on servers with an active warranty/support contract and is currently available on supported Gen10 and Gen10plus serverst, excluding HPE edeline system and HPE synergy compute nodes.
NEW QUESTION # 25
Your customer has multiple, remote sales offices with one HPE ProL1ant server deployed per Site to run local IT services. They want to centralize the monitoring ana lifecycle management of these servers using a cloud-based offering.
Which tool would demonstrate this functionality?
- A. HPE CloudPhysics
- B. HPE GreenLake Data Services Cloud Console
- C. HPE InoSight
- D. HPE GreenLake Compute Ops Management
Answer: C
Explanation:
Explanation
According to HPE, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also centralize the monitoring and lifecycle management of multiple HPE ProLiant servers deployed in remote sites using a single dashboard
1. With HPE InfoSight, you can demonstrate how to simplify and optimize your customer's IT operations from edge to cloud.
NEW QUESTION # 26
your customer needs to capture, store, manage, and analyze a dataset that exceeds capacity of typical database software tools.
What storage technology should you propose to meet their needs?
- A. File Storage
- B. Containers
- C. Block Storage
- D. Big Data
Answer: D
Explanation:
Explanation
According to Simplilearn, big data storage is a new technology that allows you to store large amounts of data that exceed the capacity of typical database software tools1. Big data storage can handle various types of data, such as structured, unstructured, or semi-structured data, and provide fast and scalable access to it1.
NEW QUESTION # 27
Your customer has a VMware vSphere cluster that needs to be upgraded to a SimpliVity Solution.
you need to collect data to recommend the correct SimpliVity Sizing.
What tool will provide this Information?
- A. HPE Storage Sizing Tool
- B. HPE Cloudphysics
- C. HPE dHCI Sizer
- D. HPE NinjaSTARS
Answer: B
Explanation:
HPE Cloudphysics is a cloud-based assessment tool that helps customers plan and optimize their VMware vSphere environments. The tool can collect data from the customer's existing environment, such as configuration, performance, capacity, and utilization, and provide insights and recommendations for migrating to HPE SimpliVity. The tool can also compare the costs and benefits of different migration scenarios and generate a detailed report with a bill of materials.
NEW QUESTION # 28
You need to explain how the HPE GreenLake platform can help your customers business become more agile.
What information you provide? (Select two)
- A. HPE active-ty monitors, manages, and deploys capacity ahead of demand so the customer can scale With ease within an installed buffer
- B. HPF GreenLake provides a larger hardware port f01i0 than traditional HPE hardware solutions
- C. customers can control costs Since advanced metering allows them to only pay tor what is used.
- D. HPE GreenLake provides infinite scale to the customer at no additional cost with its scale up policy.
- E. The HPE GreenLake platform is always managed by HPE, reducing the need for internal IT staff.
Answer: A,C
Explanation:
HPE GreenLake is a cloud services platform that delivers on-demand capacity and planning, combining the agility and economics of the public cloud with the security and performance of on- premises IT. Some of the benefits of HPE GreenLake include:
- Customers can control costs since advanced metering allows them to only pay for what is used:
HPE GreenLake offers a pay-per-use model that aligns costs with actual usage, reducing overprovisioning and improving cash flow. Customers can also scale up or down as needed and only pay for what they use.
- HPE actively monitors, manages, and deploys capacity ahead of demand so the customer can scale with ease within an installed buffer: HPE GreenLake provides customers with buffer capacity that is ready to use in minutes, not months, enabling them to respond quickly to changing business needs. Customers can also access a range of cloud services from HPE and partners through a self-service portal.
NEW QUESTION # 29
Drag and Drop Question
Your customer asks you to explain the benefits that the HPE GreenLake consumption model can provide.
Match the GreenLake benefits to their outcomes.
Answer:
Explanation:
NEW QUESTION # 30
Hotspot Question
Review the exhibit.
Click where you can access intelligent provisioning.
Answer:
Explanation:
Procedure:
- From the System Utilities screen, select Embedded Applications and press Enter.
- Select Intelligent Provisioning and press Enter.
- Reboot the server to return to the System Utilities menu.
https://techlibrary.hpe.com/docs/iss/proliant_uefi/UEFI_Gen9_121417/s_launch_intell_prov.html
NEW QUESTION # 31
Your customer has standardized on the AMD platform and asks for a new I IJ server.
Which server should you recommend?
- A. DL560
- B. DL385
- C. DL360
- D. DL365
Answer: D
NEW QUESTION # 32
......
Verified HPE0-V26 exam dumps Q&As with Correct 66 Questions and Answers: https://www.examslabs.com/HP/Hybrid-Cloud/best-HPE0-V26-exam-dumps.html
Get New HPE0-V26 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1WjsbLtaus3nvF3IafGGpmQ2g7-PwZXa9