[Nov-2021] 300-730 Dumps are Available for Instant Access from ExamsLabs
Study resources for the Valid 300-730 Braindumps!
Career Bonuses
After taking the Cisco 300-730 test along with the core exam, the candidates can earn the CCNP Security certification. The specialists with this certificate have a wide range of career opportunities to explore. Various organizations are looking to hire the reliable security professionals to protect their enterprises from cyber threats. Some of the positions that the individuals with this certification can take up include an IT Network Specialist, an IT Security Consultant, a Cybersecurity Specialist, a Network Security Specialist, an Infrastructure Engineer, a Network Engineer, a Network Administrator, and a Network Engineer, among others. The average remuneration outlook for the certificate holders is $100,000 per annum.
NEW QUESTION 53
Refer to the exhibit.
Cisco AnyConnect must be set up on a router to allow users to access internal servers 192.168.0.10 and 192.168.0.11. All other traffic should go out of the client's local NIC. Which command accomplishes this configuration?
- A. svc split include 192.168.0.0 255.255.255.0
- B. svc split exclude acl CCNP
- C. svc split exclude 192.168.0.0 255.255.255.0
- D. svc split include acl CCNP
Answer: D
NEW QUESTION 54
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$SecureMobilityClient$*
- B. *$DfltlkeldentityS*
- C. *$AnyConnectClient$*
- D. *$RemoteAccessVpnClient$*
Answer: C
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION 55
Which technology is used to send multicast traffic over a site-to-site VPN?
- A. IPsec tunnel on FTD
- B. GRE over IPsec on IOS router
- C. GRE over IPsec on FTD
- D. GRE tunnel on ASA
Answer: C
NEW QUESTION 56
Refer to the exhibit.
Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?
- A. Enable perfect forward secrecy.
- B. Make an adjustment to IPSec replay window.
- C. Specify the application networks in the remote identity.
- D. Lower the tunnel MTU.
Answer: D
NEW QUESTION 57
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?
- A. DMVPN Phase 2
- B. GETVPN
- C. FlexVPN
- D. DMVPN Phase 3
Answer: D
NEW QUESTION 58 
Refer to the exhibit. An SSL client is connecting to an ASA headend. The session fails with the message
"Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 4: ACCESS-LIST
- B. phase 5: NAT
- C. phase 9: rpf-check
- D. phase 3: UN-NAT
Answer: D
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 59
In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?
- A. Verify the spoke configuration to check if the NHRP redirect is enabled.
- B. Verify that the tunnel interface is contained within a VRF.
- C. Verify that the spoke receives redirect messages and sends resolution requests.
- D. Verify the hub configuration to check if the NHRP shortcut is enabled.
Answer: C
NEW QUESTION 60
Refer to the exhibit.
A network engineer is configuring a remote access SSLVPN and is unable to complete the connection using local credentials. What must be done to remediate this problem?
- A. Configure a AAA server group to authenticate the client.
- B. Configure the group policy to force local authentication.
- C. Enable the client protocol in the Cisco AnyConnect profile.
- D. Change the authentication method to local.
Answer: C
NEW QUESTION 61
A network engineer must design a remote access solution to allow contractors to access internal servers. These contractors do not have permissions to install applications on their computers. Which VPN solution should be used in this design?
- A. Clientless
- B. IKEv2 AnyConnect
- C. Port forwarding
- D. SSL AnyConnect
Answer: A
NEW QUESTION 62
In order to enable FlexVPN to use a AAA attribute list, which two tasks must be performed? (Choose two.)
- A. Define the AAA server.
- B. Assign the list to an authorization policy.
- C. Set the maximum segment size.
- D. Verify that clients are using the correct authorization policy.
- E. Define the RADIUS server.
Answer: B,D
NEW QUESTION 63
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. highest IP address
- B. code version
- C. highest-priority value
- D. lowest IP address
Answer: C
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport-vpn/ deployment_guide_c07_554713.html
NEW QUESTION 64
Refer to the exhibit.
Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)
- A. VTI
- B. crypto map
- C. GRE
- D. FlexVPN
- E. DMVPN
Answer: A,E
NEW QUESTION 65
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. AnyConnect profile
- B. EAP query-identity
- C. EAP-AnyConnect
- D. use of certificates instead of username and password
Answer: A
Explanation:
Section: Remote access VPNs
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION 66
Refer to the exhibit.
The customer must launch Cisco AnyConnect in the RDP machine. Which IOS configuration accomplishes this task?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
Reference:
https://community.cisco.com/t5/vpn/starting-anyconnect-vpn-through-rdp-session-on-cisco-891/td- p/2128284
NEW QUESTION 67
Refer to the exhibit.
Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)
- A. group-policy General internal
- B. group-alias General enable
- C. authentication certificate
- D. group-url https://172.16.31.10/General enable
- E. authentication aaa
Answer: A,B
NEW QUESTION 68
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. VRRP
- B. GLBP
- C. HSRP
- D. SSO
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/17826- ipsec-feat.html
NEW QUESTION 69
Which two parameters help to map a VPN session to a tunnel group without using the tunnel-group list? (Choose two.)
- A. group-alias
- B. group-url
- C. certificate map
- D. optimal gateway selection
- E. AnyConnect client version
Answer: B,C
NEW QUESTION 70
Refer to the exhibit.
An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 4: ACCESS-LIST
- B. phase 5: NAT
- C. phase 9: rpf-check
- D. phase 3: UN-NAT
Answer: D
NEW QUESTION 71
An administrator is designing a VPN with a partner's non-Cisco VPN solution. The partner's VPN device will negotiate an IKEv2 tunnel that will only encrypt subnets 192.168.0.0/24 going to 10.0.0.0/24. Which technology must be used to meet these requirements?
- A. DMVPN
- B. GETVPN
- C. VTI
- D. crypto map
Answer: D
NEW QUESTION 72
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN client profile for IPv6
- B. FlexVPN server to authenticate IPv6 peers by using EAP
- C. FlexVPN server to authorize groups by using an IPv6 external AAA
- D. FlexVPN server for an IPv6 dVTI session
Answer: A
NEW QUESTION 73 
Refer to the exhibit. Cisco AnyConnect must be set up on a router to allow users to access internal servers
192.168.0.10 and 192.168.0.11. All other traffic should go out of the client's local NIC. Which command accomplishes this configuration?
- A. svc split include 192.168.0.0 255.255.255.0
- B. svc split exclude acl CCNP
- C. svc split exclude 192.168.0.0 255.255.255.0
- D. svc split include acl CCNP
Answer: D
Explanation:
Section: Secure Communications Architectures
Explanation/Reference:
NEW QUESTION 74 
Refer to the exhibit. What is a result of this configuration?
- A. Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.
- B. Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.
- C. Spoke 1 fails the authentication because the authentication methods are incorrect.
- D. Spoke 2 fails the authentication because the remote authentication method is incorrect.
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 75
......
Updated 300-730 Tests Engine pdf - All Free Dumps Guaranteed: https://www.examslabs.com/Cisco/CCNP-Security/best-300-730-exam-dumps.html
Latest CCNP Security 300-730 Actual Free Exam Questions: https://drive.google.com/open?id=1Su-twzBsR8siEMMMRXXTiHgBLi3PA6Go