New MS-100 Dumps For Preparing Microsoft 365 Certified Microsoft Exam Well [Q229-Q252]

Share

New MS-100 Dumps For Preparing Microsoft 365 Certified Microsoft Exam Well

Updated MS-100 Dumps Questions Are Available [2024] For Passing Microsoft Exam


The Microsoft MS-100 exam consists of multiple-choice questions that evaluate the candidate's knowledge of Microsoft 365 services, including Azure AD and Intune. The questions are designed to test the candidate's ability to configure, manage, and monitor these services. Candidates must also demonstrate their knowledge of identity protection, device management, and access management in Microsoft 365.

 

NEW QUESTION # 229
Your company has 20 employees, Each employees has a mailbox hosted in Outlook.com.
The company purchases a Microsoft 365 subcription.
You plan to migrate all the mailboxes to Microsoft 365.
You need to recommend which type of migration to use for the mailboxes.
What should recommend?

  • A. Cutover migration
  • B. Minimal hybrid migration
  • C. IMAP migration
  • D. Staged migration

Answer: C

Explanation:
To migrate mailboxes from Outlook.com to Office 365, you need to use the IMAP migration method.
After you've added your users to Office 365, you can use Internet Message Access Protocol (IMAP) to migrate email for those users from their IMAP-enabled email servers.
In the Microsoft 365 admin center, go to Setup > Data migration to start migrating IMAP enabled emails. The email migrations page is pre-configured for migrations from Gmail, Outlook, Hotmail and Yahoo. You can also enter your own IMAP server name and connection parameters to migrate from an email service that is not listed.
References:
https://docs.microsoft.com/en-us/exchange/mailbox-migration/migrating-imap-mailboxes/imap-migration-in-the-admin-center


NEW QUESTION # 230
Your company has an on-premises Microsoft Exchange Server 2013 organization.
The company has 100 users.
The company purchases Microsoft 365 and plans to move its entire.- infrastructure to the cloud.
The company does NOT plan to sync the on-premises Active Directory domain to Microsoft Azure Active Directory (Azure AD).
You need to recommend which type of migration to use to move all email messages, contacts, and calendar items to Exchange Online.
What should you recommend?

  • A. staged migration
  • B. IMAP migration
  • C. remote move migration
  • D. cutover migration

Answer: D

Explanation:
References:
https://docs.microsoft.com/en-us/exchange/mailbox-migration/cutover-migration-to-office-365


NEW QUESTION # 231
You need to recommend the development environment and tools for the redesign of the research department's SharePoint Online sites.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:


NEW QUESTION # 232
Your network contains a single Active Directory domain and two Microsoft Azure Active Directory (Azure AD) tenants.
You plan to implement directory synchronization for both Azure AD tenants. Each tenant will contain some of the Active Directory users.
You need to recommend a solution for the planned directory synchronization.
What should you include in the recommendation?

  • A. Deploy one server that runs Azure AD Connect, and then filter the users for each tenant by using domainbased filtering.
  • B. Deploy one server that runs Azure AD Connect, and then specify two sync groups.
  • C. Deploy two servers that run Azure AD Connect, and then filter the users for each tenant by using organizational unit (OU)-based filtering.
  • D. Deploy one server that runs Azure AD Connect, and then filter the users for each tenant by using organizational unit (OU)-based filtering.

Answer: C

Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/plan-connect-topologies#multiple-azure-adtenant


NEW QUESTION # 233
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Lab information
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: m3t^We$Z7&xy
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 11440873

Your organization recently purchased a projector that can be moved easily between conference rooms.
You need to ensure that any user in the organization can add the projector to a Microsoft Outlook meeting request. The solution must ensure that a user named Lee Gu must approve all meeting requests.
To answer, sign in to the Microsoft 365 portal.

Answer:

Explanation:
See explanation below.
Explanation
You need to create a resource mailbox in Exchange.
1. Go to the Exchange Admin Center.
2. In the left navigation pane, select Recipients.
3. Click the Resources link.
4. Click the plus (+) icon and select 'Equipment Mailbox'.
5. Give the mailbox a name such as 'Projector1'.
6. Enter the name projector1 in the email address field.
7. Click the Save button to create the equipment mailbox.
8. In the resource mailbox list, select the new mailbox and click the Edit icon (pencil icon).
9. Select 'Booking Delegates' in the menu list.
10. Select the option, "Select delegates who can accept or decline booking requests".
11. Click the plus (+) icon and add Lee Gu as a delegate.
12. Click the Save button to save the changes.


NEW QUESTION # 234
You have an Active Directory domain named Adatum.com that is synchronized to Azure Active Directory as shown in the exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Group Writeback is enabled in the Azure AD Connect configuration so groups created in Azure Active Directory will be synchronized to the on-premise Active Directory. A security group created in Azure Active Directory will be synchronized to the on-premise Active Directory as a security group.
Device Writeback is enabled in the Azure AD Connect configuration so computers joined to the Azure Active Directory will be synchronized to the on-premise Active Directory. They will sync to the RegisteredDevices container in the on-premise Active Directory.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-device-writeback


NEW QUESTION # 235
You have a Microsoft 365 subscription.
You register two applications named App1 and App2 to Azure Active Directory (Azure AD).
You need to ensure that users who connect to App1 require multi-factor authentication (MFA). MFA is required only for App1.
What should you do?

  • A. From the Azure Active Directory admin center, create a conditional access policy.
  • B. From the Microsoft 365 admin center, configure the Modern authentication settings.
  • C. From the Enterprise applications blade of the Azure Active Directory admin center, configure the Users settings.
  • D. From Multi-Factor Authentication, configure the service settings.

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/howto-conditional-access-policy-all-u


NEW QUESTION # 236
Your company uses on-premises Windows Server File Classification Infrastructure 9FCI). Some documents on the on-premises file servers are classifies as Confidential.
You migrate the files from the on-premises file servers to Microsoft SharePoint Online.
You need to ensure that you can implement data loss prevention (DLP) policies for the uploaded files based on the Confidential classification.
What should you do first?

  • A. From the Security & Compliance Center PowerShell, run the
    New-DlpComplianceRule cmdlet.
  • B. From the Security & Compliance Center PowerShell, run the
    New-DataClassification cmdlet.
  • C. From the SharePoint admin center, configure hybrid search.
  • D. From the SharePoint admin center, create a managed property.

Answer: A

Explanation:
Explanation
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/powershell/module/exchange/policy-and-compliance-dlp/newdataclassification


NEW QUESTION # 237
You have a Microsoft 365 E5 subscription.
Currently, users cannot install Microsoft 365 Apps for enterprise from the Microsoft Office portal.
You need to perform the following tastes:
* Enable the installation of Microsoft 365 Apps for enterprise from the Office portal
* Ensure that the users can auto-claim Microsoft Teams licenses.
Which two Org settings should you configure in the Microsoft 365 admin center? To answer, select the appropriate settings in the answer area.

Answer:

Explanation:


NEW QUESTION # 238
You need to provide users with access to SalesApp. The solution must meet the technical requirements.
What should you include in the solution?

  • A. App Catalog in SharePoint Online
  • B. sideloading
  • C. Centralized Deployment
  • D. Microsoft AppSource

Answer: D


NEW QUESTION # 239
You have Windows 10 devices that are managed by using Microsoft Endpoint Manager. All the devices have Microsoft Office 365 apps installed.
You need to configure the proofing tool settings for the Office 365 apps.
From the Microsoft Endpoint Manager admin center, what should you create?

  • A. a device compliance policy
  • B. a device configuration profile
  • C. an app configuration policy
  • D. an app

Answer: C

Explanation:
Section: [none]


NEW QUESTION # 240
Your network contains an on premises Active Directory domain named contoso.com. The domain contains five domain controllers.
Your company purchases Microsoft 365 and creates a Microsoft Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
You plan to establish federation authentication between on premises Active Directory and the Azure AD tenant by using Active Directory Federation Services (AD FS).
You need to establish the federation.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

Answer:

Explanation:

Explanation


NEW QUESTION # 241
Your company has on-premises servers and a Microsoft Azure Active Directory (Azure AD) tenant.
Several months ago, the Azure AD Connect Health agent was installed on all the servers.
You review the health status of all the servers regularly.
Recently, you attempted to view the health status of a server named Server1 and discovered that the server is NOT listed on the Azure Active Directory Connect Servers list.
You suspect that another administrator removed Server1 from the list.
You need to ensure that you can view the health status of Server1.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

  • A. From Server1, change the Azure AD Connect Health services Startup type to Automatic (Delayed Start).
  • B. From Azure Cloud shell, run the Connect-AzureADcmdlet.
  • C. From Server1, reinstall the Azure AD Connect Health agent.
  • D. From Windows PowerShell, run the
    Register-AzureADConnectHealthSyncAgentcmdlet.
  • E. From Server1, change the Azure AD Connect Health services Startup type to Automatic.

Answer: C,D


NEW QUESTION # 242
You have a data loss prevention (DLP) policy.
You need to increase the likelihood that the DLP policy will apply to data that contains medical terms from the International Classification of Diseases (ICD-9-CM). The solution must minimize the number of false positives.
Which two settings should you modify? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/data-loss-prevention-policies
https://docs.microsoft.com/en-us/office365/securitycompliance/what-the-sensitive-information-types-look-for#international-classification-of-diseases-icd-9-cm


NEW QUESTION # 243
You have a Microsoft 365 Enterprise subscription.
You create a password policy as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/concept-password-ban-bad


NEW QUESTION # 244
You have a Microsoft 365 subscription that uses a default domain named litwareinc.com. The subscription has a Microsoft SharePoint site collection named Collection1.
From the Azure Active Directory admin center, you configure the External collaboration settings as shown in the External Collaboration Settings exhibit. (Click the External Collaboration Settings tab.)

From the SharePoint admin center, you configure the sharing settings as shown in the SharePoint Sharing exhibit. (Click the SharePoint Sharing tab.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Box 1: Yes
In the first exhibit, "Allow invitations to be sent to any domain (most inclusive) is enabled". Also, everyone is allowed to 'invite'. The Target Domains setting will have no effect. This would only apply if one of the Allow/Deny invitations to the specified domain options were selected.
There is a restriction that blocks invitations being sent to contoso.com. However, this restriction does not apply to Fabrikam.com. Therefore, you can share the files in Collection1 to [email protected].
Box 2: Yes
As noted above, external sharing is enabled for any domain except contoso.com. The Target Domains setting in the first exhibit will have no effect. Therefore, you can share Collection1 to [email protected].
Box 3: Yes
As noted above, external sharing is enabled for any domain except contoso.com. Blocking sharing to contoso.com does not block sharing to us.contoso.com. Therefore, you can share Collection1 to [email protected].
Reference:
https://docs.microsoft.com/en-us/sharepoint/turn-external-sharing-on-or-off


NEW QUESTION # 245
You need to meet the security requirements for User3. The solution must meet the technical requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
References:
https:HYPERLINK "https://docs.microsoft.com/en-us/office365/SecurityCompliance/eop/feature-permissions-in-eop"//docs.microsoft.com/en-us/office365/SecurityCompliance/eop/feature-permissions-in-eop


NEW QUESTION # 246
You have a Microsoft 365 subscription that contains the users shown in the following table.

You plan to use Exchange Online to manage email for a DNS domain.
An administrator adds the DNS domain to the subscription.
The DNS domain has a status of incomplete setup.
You need to identify which user can complete the setup of the DNS domain. The solution must use the principle of least privilege.
Which user should you identify?

  • A. User1
  • B. User3
  • C. User4
  • D. User2

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoft-365/admin/setup/add-domain?view=o365-worldwide


NEW QUESTION # 247
You have a Microsoft 365 subscription.
You are configuring permissions for Security & Compliance.
You need to ensure that the users can perform the tasks shown in the following table.

The solution must use the principle of least privilege.
To which role should you assign each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
References:
https://docs.microsoft.com/en-usHYPERLINK "https://docs.microsoft.com/en-us/office365/securitycompliance/permissions-in-the-security-and-compliance-center#mapping-of-role-groups-to-assigned-roles"/office365/securitycompliance/permissions-in-the-security-and-compliance-center#mapping-of-role-groups-to-assigned-roles


NEW QUESTION # 248
Your company has a Microsoft 365 subscription.
You upload several archive PST files to Microsoft 365 by using the Security & Compliance admin center.
A month later, you attempt to run an import job for the PST files.
You discover that the PST files were deleted from Microsoft 365.
What is the most likely cause of the files being deleted? More than one answer choice may achieve the
goal. Select the BEST answer.

  • A. PST files are deleted automatically from Microsoft 365 after 30 days.
  • B. The PST files were corrupted and deleted by Microsoft 365 security features.
  • C. The size of the PST files exceeded a storage quota and caused the files to be deleted.
  • D. Another administrator deleted the PST files.

Answer: A

Explanation:
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/faqimporting-pst-files-to-office-365


NEW QUESTION # 249
Your network contains an Active Directory domain named contoso.com. The domain contains five domain
controllers.
You purchase Microsoft 365 and plan to implement several Microsoft 365 services.
You need to identify an authentication strategy for the planned Microsoft 365 deployment. The solution
must meet the following requirements:
Ensure that users can access Microsoft 365 by using their on-premises credentials.

Use the existing server infrastructure only.

Store all user passwords on-premises only.

Be highly available.

Which authentication strategy should you identify?

  • A. password hash synchronization and seamless SSO
  • B. federation
  • C. pass-through authentication and seamless SSO with password hash synchronization
  • D. pass-through authentication and seamless SSO

Answer: D


NEW QUESTION # 250
You have a Microsoft 365 Enterprise E5 subscription.
You need to enforce multi-factor authentication on all cloud-based applications for the users in the finance
department.
What should you do?

  • A. Create a sign-in risk policy.
  • B. Create an app permission policy.
  • C. Crease a session policy.
  • D. Create an activity policy.

Answer: A

Explanation:
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/howto-sign-in-risk-policy


NEW QUESTION # 251
You need to ensure that Admin4 can use SSPR.
Which tool should you use, and which action should you perform? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-sspr-deployment


NEW QUESTION # 252
......


Best Source for the preparation of the Exam:

MS-100 Dumps Through the free MS-100 prep material available on this website, you can easily make out your concept regarding the exam. The study guide is an excellent solution for the preparation of any certification exam with a 100% success rate in a few days. This is because it makes you familiar with all the important aspects of the certification exam. It covers the syllabus of the exam and all hard tasks, step by step.

The most renowned and authentic platform is Brain Dumps if someone wishes to pass the real Microsoft Certification Exam in the first attempt with complete confidence then it can be achieved with the right guidance and proper preparation. Allfreedumps provides valid information regarding different certifications at a very less cost. Secured payment options are also provided which helps in grabbing the right information concerning the Microsoft certification exam. Develop your skills in the field of IT and grab a professional career in this competitive world.

 

Microsoft Exam 2024 MS-100 Dumps Updated Questions: https://www.examslabs.com/Microsoft/Microsoft-365/best-MS-100-exam-dumps.html

Free UPDATED Microsoft MS-100 Certification Exam Dumps is Online: https://drive.google.com/open?id=1kvU_msClR-M8zG1OhAuV7lFJh6zuy74O