[Dec 29, 2021] NS0-519 Exam Dumps 100% Same Q&A In Your Real Exam
NS0-519 Test Engine Dumps Training With 60 Questions
NEW QUESTION 13
You must ensure that a cluster that uses FabricPool has high availability,
What is required to accomplish this task?
- A. an IPspace that is dedicated to the FabricPool
- B. a cloud bucket
- C. four cluster LIFs
- D. a local failover policy for intercluster LIFs
Answer: D
NEW QUESTION 14
You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.
In this scenario, which NetApp technology accomplishes this task?
- A. Fabric Pool
- B. MetroCluster
- C. Flash Pool
- D. Cloud Sync
Answer: A
NEW QUESTION 15
Click the Exhibit button.
A customer has a 4-node AFF A700 cluster that uses ONTAP 9.7. The customer's environment has the Emulex LP31004-M6 and Emulex LPe32002-M2 HBAs.
Referring to the exhibit, using the NVMe protocol, which two host operating systems would be supported? (Choose two.)
- A. SLES 15 64-bit
- B. RHEL 7.5 64-bit
- C. SLES 12 SP3 64-bit
- D. Microsoft Windows Server 2012 R2
Answer: A,C
NEW QUESTION 16
Click the Exhibit button.
You have an existing legacy Fibre Channel SAN environment and have deployed an ONTAP AFF A800 cluster. You are planning to migrate a NetApp Foreign LUN Import using the existing SAN environment.
Referring to the exhibit, how must the UTA2 ports be configured?
- A. Configure the CNA to target mode.
- B. Configure the CNA to initiator mode.
- C. Configure the FCP to initiator mode.
- D. Configure the FCP to target mode.
Answer: C
NEW QUESTION 17
Click the Exhibit button.
Referring to the exhibit, how many LUNs should the server administrator see on the Windows 2016 host?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 18
An ONTAP administrator is troubleshooting a fabric login issue with a client. The SVM in question uses both FC and NFS protocols.
In this scenario, what would be the least disruptive operation?
- A. Use ONTAP System Manager to stop and then restart the SVM.
- B. Use the command line to stop and start the FCP service on the cluster.
- C. Reboot the Brocade switch.
- D. Use ONTAP System Manager to disable and then re-enable the LIF port in the SVM.
Answer: C
NEW QUESTION 19
Click the Exhibit button.
Referring to the dual-fabric cabling diagram shown in the exhibit, which scenario explains why the customer's iSCSI host experienced a SAN outage with a LUN on Node 2?
- A. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included all nodes, and Node 1 and Node 2 went down.
- B. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included Node 1 and Node 2, and Node 1 went down.
- C. iSCSI LIFs were configured on Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and the cable connecting the host to Switch 1 went bad.
- D. iSCSI LIFs were configured on Node 1 and Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and Switch 1 went down.
Answer: A
NEW QUESTION 20
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the storage back-end subsystem.
In this scenario, which two actions satisfy the failure criteria? (Choose two.)
- A. Pull an Ethernet cable from a Linux host.
- B. Disable Snapshot policies.
- C. Perform a storage controller failover.
- D. Pull an Ethernet cable from a storage port with a cluster LIF.
Answer: C,D
NEW QUESTION 21
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server.
After the administrator performs a rescan, the LUN is not visible on the host.
Which statement describes how to solve this problem?
- A. Perform a takeover/giveback of the controller that is hosting the LUN.
- B. Enable ALUA support on the VMware host.
- C. Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.
- D. Create an igroup, add the iSCSI IQN, then map the LUN to the igroup.
Answer: D
NEW QUESTION 22
Which two SAN components are inventoried by Active IQ OneCollect? (Choose two.)
- A. FC switches
- B. fans
- C. power supply
- D. storage controller
Answer: A,D
NEW QUESTION 23
You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)
- A. Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
- B. Add NetApp WWN initiator ports to the existing zones.
- C. Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.
- D. Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
Answer: C,D
NEW QUESTION 24
What information should you document about your storage fabrics? (Choose two.)
- A. name service
- B. Inter-Switch Links (ISLs)
- C. zoning configuration
- D. igroup name
Answer: B,C
NEW QUESTION 25
A storage administrator is setting up a Red Hat Enterprise Linux 8.1 system to use NVMe storage in ONTAP 9.7.
In this scenario, which action is required?
- A. Load the Ethernet drivers.
- B. Set up ALUA.
- C. Set up the Red Hat auto mounter.
- D. Load the FC HBA drivers.
Answer: D
NEW QUESTION 26
An administrator added the FCP protocol to an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Which two statements describe how to solve this problem? (Choose two.)
- A. Perform takeover and giveback of both controllers.
- B. Disable and enable the FC port with the attached host, causing a FLOGI.
- C. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
- D. Create a zone with a single initiator and the target LIF's WWPN.
Answer: C,D
NEW QUESTION 27
Click the Exhibit button.
Referring to the exhibit, which container obtains space savings from deduplication, compression, and compaction?
- A. the aggregate
- B. the qtree
- C. the LUN
- D. the volume
Answer: A
NEW QUESTION 28
What is a prerequisite for enabling SCSI UNMAP support for SAN attached hosts?
- A. The space-slo parameter must be set to none.
- B. The space-allocation parameter must be enabled.
- C. The space-slo parameter must be set to semi-thick.
- D. The LUN mapping must be deleted.
Answer: B
NEW QUESTION 29
......
NS0-519 Practice Test Pdf Exam Material: https://www.examslabs.com/NetworkAppliance/NetApp-Certified/best-NS0-519-exam-dumps.html