Cisco 300-815 Exam Questions (Updated 2022) 100% Real Question Answers
Pass Cisco 300-815 Exam Quickly With ExamsLabs
NEW QUESTION 61
Where is the dtmf-relay command configured on Cisco Unified Border Element?
- A. in the voice-class VoIP configuration
- B. in the VoIP dial peer
- C. in global SIP configuration
- D. in the VoIP or POTS dial peers
Answer: B
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/dtmf- relay.html
NEW QUESTION 62
An engineer is configuring Cisco UCM lo forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken to accomplish this task?
- A. Configure enterprise softkeys.
- B. Configure class of control.
- C. Configure service parameters
- D. Configure device pools.
Answer: C
NEW QUESTION 63
How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?
- A. At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.
- B. At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.
- C. At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.
- D. At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.
Answer: C
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION 64
Which section under the Real-Time Monitoring Tool allows for reviewing the call flow and signaling for a SIP call in real time?
- A. Voice/Video > Session Trace Log View > Real Time Data
- B. Voice/Video > Session Trace Log View > Open From Local Disk
- C. Analysis Manager > Inventory > Trace File Repositories
- D. System > Tools > Trace and Log Central
Answer: A
NEW QUESTION 65
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.
Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- B. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- D. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
Answer: D,E
NEW QUESTION 66
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?
- A. ip prefix-list to filter the unwanted IP address
- B. access list allowing the firewall IP
- C. bind signaling and media to the loopback interface
- D. use of port 5061 for SIP secure
Answer: C
NEW QUESTION 67
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. device pools
- B. CTI route points
- C. translation patterns
- D. CTI ports
- E. IP phones
Answer: D,E
NEW QUESTION 68
What is first preference condition matched in a SIP-enabled incoming dial peer?
- A. answer-address
- B. incoming uri
- C. incoming called-number
- D. target carrier-id
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/voice/ip-telephony-voice-over-ip-voip/211306-In- Depth-Explanation-of-Cisco-IOS-and-IO.html#anc8
NEW QUESTION 69
Refer to the exhibit.
A call mode through the Cisco Unified Border Element to pilot 2000 is foiling. What is causing the call to foil?
- A. VAD was not disabled on the outgoing dial poor.
- B. No codecs are configured on the dial peers
- C. The destination pattern is incorrect for the dialed number.
- D. The Cisco Unified Border Element is not receiving a response to its OPTION keepahves.
Answer: C
NEW QUESTION 70
Refer to the exhibit.
A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?
- A. On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
- B. Accept Audio Codec Preferences in Received Offer must be set to On.
- C. Allow Passthrough of Configured Line Device Caller Information must be enabled.
- D. Early Offer for G Clear Calls must be enabled.
Answer: A
NEW QUESTION 71 
Refer to the exhibit. How many maximum hops can an ILS updarte traverse?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Section: Cisco Unified CM Call Control Features
NEW QUESTION 72
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. chooses the route group that is configured under the device pool of the called-party device
- B. chooses the route group that is configured under the device pool of the calling-party device
- C. can be assigned directly to the route pattern
- D. can be associated under the route group
- E. can be associated only under the route list
Answer: B,E
NEW QUESTION 73 
Refer to the exhibit. Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user
+1613-555-1234 dials the number?
- A. calling number 011613-555-1234 and numbering type "international"
- B. calling number 011-1-613-555-1234 and numbering type "subscriber"
- C. calling number 613-555-1234 and numbering type "national"
- D. calling number 613-555-1234 and numbering type "subscriber"
Answer: C
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION 74
When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?
- A. RINGING
- B. ALERTING
- C. CONNECT
- D. PROCEEDING
Answer: C
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION 75
When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?
- A. ALERTING
- B. RINGING
- C. CONNECT
- D. PROCEEDING
Answer: A
NEW QUESTION 76
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)
- A. Destination Port in SIP Trunk Security Profile configuration
- B. Incoming Port in Security Information of the SIP Profile configuration.
- C. Incoming Port in SIP Information section of the SIP Trunk configuration.
- D. Incoming Port in SIP Trunk Security Profile configuration
- E. Destination Port in SIP Information section of the SIP Trunk configuration
Answer: D,E
NEW QUESTION 77
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C. Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- B. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- D. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
Answer: D,E
NEW QUESTION 78
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. device pools
- B. CTI route points
- C. translation patterns
- D. CTI ports
- E. IP phones
Answer: D,E
Explanation:
Section: Call Control and Dial Planning
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/11_5_1/ CUCM_BK_CBA47A6E_00_cucm-dna-guide-115/CUCM_BK_CBA47A6E_00_cucm-dna-guide-
115_chapter_01.html#CUCM_TP_A5DA99E0_00
NEW QUESTION 79
An administrator sees the voice register pool 1 command in a Cisco UCME configuration. Which configuration is occurring in this section?
- A. configuration for a pool of SIP phones (similar to device pool on Cisco UCM)
- B. configuration items common for all SIP phones
- C. configuration for SIP registrar service
- D. configuration for a single SIP phone
Answer: D
NEW QUESTION 80
Refer to the exhibit.
Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user +1613-555-1234 dials the number?
- A. calling number 011613-555-1234 and numbering type "international"
- B. calling number 011-1-613-555-1234 and numbering type "subscriber"
- C. calling number 613-555-1234 and numbering type "national"
- D. calling number 613-555-1234 and numbering type "subscriber"
Answer: C
NEW QUESTION 81
......
Real Cisco 300-815 Exam Questions [Updated 2022]: https://www.examslabs.com/Cisco/CCNP-Collaboration/best-300-815-exam-dumps.html
Prepare 300-815 Question Answers - 300-815 Exam Dumps: https://drive.google.com/open?id=1LegpbX4wmvqEs4RlmsuXnNzLOBIeTcY0