Brilliant NSE5_FMG-6.2 Exam Dumps Get NSE5_FMG-6.2 Dumps PDF
NSE5_FMG-6.2 Dumps PDF - NSE5_FMG-6.2 Real Exam Questions Answers
NEW QUESTION 12
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)
- A. It supports the FortiManager script feature
- B. It allows making configuration changes for managed devices on FortiManager panes
- C. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
- D. You cannot assign the same ADOM to multiple administrators
Answer: B,C
NEW QUESTION 13
Refer to the exhibit.
Which two statements about the output are true? (Choose two.)
- A. Configuration changes directly made on FortiGate have been automatically updated to the device-level database.
- B. The latest revision history for the managed FortiGate does match with the FortiGate running configuration.
- C. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.
- D. The latest revision history for the managed FortiGate does not match with the device-level database.
Answer: B,D
NEW QUESTION 14
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?
- A. Policy packages will be imported into the new ADOM automatically
- B. The shared policy package will not be moved to the new ADOM
- C. Any pending device settings will be installed automatically
- D. Any unused objects from a previous ADOM are moved to the new ADOM automatically
Answer: A
NEW QUESTION 15
Refer to the exhibit. An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?
- A. It allows FortiGate to reboot and recover the previous configuration from its configuration file.
- B. It allows FortiGate to reboot and restore a previously working firmware image.
- C. It allows FortiGate to unset central management settings.
- D. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.
Answer: A
NEW QUESTION 16
View the following exhibit. When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true?
(Choose two.)
- A. Provides the option to preview configuration changes prior to installing them
- B. Will not create new revision in the revision history
- C. Installs device-level changes to FortiGate without launching the Install Wizard
- D. Once initiated, the install process cannot be canceled and changes will be installed on the managed device
Answer: C,D
Explanation:
The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this option, you cannot preview the changes prior to committing. Administrator should be certain of the changes before using this install option, because the install can't be cancelled after the process is initiated.
NEW QUESTION 17
Which two statements are correct for configuration changes made by FortiManager scripts? (Choose two)
- A. When run on the device database, you can install changes to the managed FortiGate devices using the installation wizard.
- B. When run on the device database, changes are automatically installed to the managed FortiGate devices.
- C. When run on managed devices directly, changes are automatically installed to the managed FortiGate devices.
- D. When run on managed devices directly, you can install changes to the managed FortiGate devices using the installation wizard.
Answer: A,C
Explanation:
A script can make many changes to a managed device and are useful for bulk configuration changes and consistency across multiple managed devices. Scripts can be run in three different ways:
Device Database: By default, a script can be executed on the device database. It is recommended you run the changes on the device database (default setting), as this allows you to check what configuration changes you will send to the managed device. Once scripts are run on the device database you can then install these changes to a managed device using the installation wizard.
Policy Package, ADOM database: A script can be run here to create ADOM level objects that will be applied to your managed devices and can then be installed using the installation wizard.
Remote FortiGate Directly (via CLI): A script can be executed directly on the device and you don't need to install these changes using the installation wizard. As the changes are directly installed on the managed device, no option is provided to verify and check the configuration changes through FortiManager.
NEW QUESTION 18
As a result of enabling FortiAnalyzer features on FortiManager, which of the following statements is true?
- A. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager
- B. FortiManager can be used only as a logging device.
- C. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices
- D. FortiManager will reboot
Answer: D
NEW QUESTION 19
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)
- A. The script history will show successful installation of the script on the remote FortiGate
- B. You must install these changes using the Install Wizard to a managed device
- C. The successful execution of a script on the Device Database will create a new revision history
- D. The Device Settings Status will be tagged as Modified
Answer: A,C
NEW QUESTION 20
Refer to the exhibit.
You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)
- A. It will not create a new revision in the revision history
- B. It installs device-level changes to FortiGate without launching the Install Wizard
- C. It provides the option to preview configuration changes prior to installing them
- D. It cannot be canceled once initiated and changes will be installed on the managed device
Answer: B,D
NEW QUESTION 21
What does a policy package status of Modified indicate?
- A. FortiManager is unable to determine the policy package status
- B. The policy package was never imported after a device was registered on FortiManager
- C. Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.
- D. Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager
Answer: C
Explanation:
http://help.fortinet.com/fmgr/50hlp/56/5-6-1/FortiManager_Admin_Guide/1200_Policy%20and%20Objects/0800_Managing%20policy%20packages/2200_Policy%
20Package%20Installation%20targets.htm
NEW QUESTION 22
Which two items are included in the FortiManager backup? (Choose two.)
- A. FortiGuard database
- B. All devices
- C. Global database
- D. Logs
Answer: B,C
NEW QUESTION 23
An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN using central management?
- A. You must specify a gateway address when you create a default static route
- B. Remove all the interface references such as routes or policies
- C. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.
- D. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
Answer: C
NEW QUESTION 24
Refer to the exhibit.
What can you conclude from the failed installation log shown in the exhibit?
- A. Policy ID 2 is installed without a source address.
- B. Policy ID 2 is installed in the disabled state.
- C. Policy ID 2 is installed without a source device.
- D. Policy ID 2 will not be installed.
Answer: C
NEW QUESTION 25
Which two items are included in the FortiManager backup? (Choose two.)
- A. FortiGuard database
- B. All devices
- C. Global database
- D. Logs
Answer: B,C
Explanation:
Reference:
https://kb.fortinet.com/kb/viewContent.do?externalId=FD34549
NEW QUESTION 26
View the following exhibit. Which of the following statements are true based on this configuration setting? (Choose two.)
- A. This setting is applied globally to all ADOMs.
- B. This setting will enable the ADOMs feature on FortiManager.
- C. This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.
- D. This setting will allow automatic updates to the policy package configuration for a managed device.
Answer: A,C
NEW QUESTION 27
What is the purpose of the Policy Check feature on FortiManager?
- A. To find and provide recommendation for optimizing policies in a policy package
- B. To find and provide recommendation to combine multiple separate policy packages into one common policy package
- C. To find and merge duplicate policies in the policy package
- D. To find and delete disabled firewall policies in the policy package
Answer: A
NEW QUESTION 28
Refer to the exhibit. An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)
- A. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
- B. The administrator profile does not have full access privileges like the Super_User profile.
- C. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
- D. FortiAnalyzer features are not enabled on FortiManager.
Answer: A,D
NEW QUESTION 29
What does a policy package status of Modified indicate?
- A. FortiManager is unable to determine the policy package status
- B. The policy package was never imported after a device was registered on FortiManager
- C. Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.
- D. Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager
Answer: C
NEW QUESTION 30
View the following exhibit, which shows the Download Import Report:
Why it is failing to import firewall policy ID 2?
- A. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager
- B. The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate
- C. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager
- D. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.
Answer: B
NEW QUESTION 31
The service access settings for a FortiManager network interface relate to which product feature?
- A. Device Manger
- B. FortiGuard
- C. FortiView
- D. Policy & Objects
Answer: B
NEW QUESTION 32
Refer to the exhibit.
An administrator is importing a new device to FortiManager and has selected the options shown in the exhibit.
What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?
- A. The unused objects that are not tied to the firewall policies will be installed on FortiGate.
- B. The unused objects that are not tied to the firewall policies in the policy package will be deleted from the FortiManager database.
- C. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted.
- D. The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate.
Answer: C
NEW QUESTION 33
......
Valid NSE5_FMG-6.2 Test Answers & Fortinet NSE5_FMG-6.2 Exam PDF: https://www.examslabs.com/Fortinet/Fortinet-NSE-5/best-NSE5_FMG-6.2-exam-dumps.html