Authentic JN0-349 Dumps With 100% Passing Rate Practice Tests Dumps
Juniper JN0-349 Real Exam Questions Guaranteed Updated Dump from ExamsLabs
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which policy will export routes to IBGP peers?
- A. static-1
- B. static-2
- C. static-3
- D. static-4
Answer: D
NEW QUESTION 41
Which two sequences correctly describe the processing order of firewall filters on an EX Series
switch? (Choose two.)
- A. port filter > VLAN filter > router filter > transmit packet
- B. receive packet > port filter > VLAN filter > router filter
- C. receive packet > router filter > VLAN filter > port filter
- D. router filter > VLAN filter > port filter > transmit packet
Answer: A,C
NEW QUESTION 42
Exhibit.
Referring to the exhibit, which statement is correct?
- A. The ge-0/0/9 interface is using the default interface priority value.
- B. This switch has a bridge priority of 8k.
- C. The ge-0/0/15 interface is using the default port cost.
- D. This switch is currently blocking all traffic.
Answer: B
NEW QUESTION 43
Referring to the exhibit, what will be the IS-IS adjacency result of the configurations?
- A. A level 1 and level 2 IS-IS adjacency will form
- B. A level 2 IS4S adjacency will form
- C. No IS-IS adjacencies will form
- D. A level 1 IS-IS adjacency will form
Answer: C
NEW QUESTION 44
What are two characteristics of IS-IS CSNPs? (Choose two.)
- A. IS-IS CSONs contains header information for all link-state PDUs.
- B. IS-IS CSPNs are used to maintain the link-state database synchronization.
- C. IS-IS CSPNs contain header information for specific requested link-state PDUs.
- D. IS-IS CSPNs are used to request a copy of a missing link state PDU.
Answer: A,B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/is-is-routing-overview.html
NEW QUESTION 45
You configured a GRE tunnel that traverses a path using default MTU settings. You want to ensure that packets are not dropped of fragmented.
In this scenario, what is the maximum packet size that would traverse the GRE tunnel?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 46
In the exhibit, each IP subnet in the network is associated with a unique VLAN ID.
Which action will ensure that Host C will communicate with Host A and Host B?
- A. Configure all switch ports connecting to the host devices as access ports associated with a
common VLAN. - B. Configure an IRB interface for each VLAN and associate It with its corresponding VLAN.
- C. Configure a port-based ACL that permits inter-VLAN routing for all configured VLANs.
- D. Configure all switch ports connecting to the host devices as trunk ports associated with all VLANs
Answer: A
NEW QUESTION 47
Click the Exhibit button.
Referring to the exhibit, what do the asterisks (*) indicate?
- A. The router originated the entries
- B. The entries are new
- C. The entries are stale
- D. The router received the entries
Answer: A
NEW QUESTION 48
You are attempting to set up VRRP with R1 and R2 being participating members. You want R1 to
be the master router and R2 to be the backup router with the virtual router they create being at
address 172.25.100.1.
The virtual router is not pinging from either User A or User B. Referring to the exhibit, what must
be done to correct the problem?
- A. The VRRP priority value on R1 and R2 must match
- B. A VRRP policy is needed on R1 and R2.
- C. A VRRP authentication type value is needed on R1 and R2.
- D. The VRRP group value on R1 and R2 must match.
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-
statement/priority-edit-interfaces-vrrp.html
NEW QUESTION 49
Which two routers belong to the 172.16.0.0/22 aggregate route? (Choose two.)
- A. 172.16.5.0/24
- B. 172.16.3.0/24
- C. 172.16.4.0/24
- D. 172.16.0.0/24
Answer: B,D
NEW QUESTION 50
Which three mechanisms are associated with the bridging process? (Choose three.)
- A. filtering
- B. aging
- C. blocking
- D. listening
- E. flooding
Answer: A,B,E
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bridging-and-vlans.html
NEW QUESTION 51
Click the Exhibit button.
Referring to the exhibit, which configuration change is needed for an IS-IS Level 1 adjacency between R1 and R2?
- A. Configure the lo0 family ISO address 49.0002.0010.0042.0002.00 on R2
- B. Configure the lo0 family ISO address 49.0002.0010.0042.0002.00 on R1
- C. Enable Level 2 on R1's ge-0/0/1 interface
- D. Disable Level 2 on R2's ge-0/0/1 interface
Answer: A
NEW QUESTION 52
What are the three possible port states when using RSTP? (Choose two.)
- A. Discarding
- B. Tagging
- C. Listening
- D. Learning
- E. Forwarding
Answer: A,D,E
NEW QUESTION 53
Exhibit.
In the exhibit, each IP subnet in the network is associated with a unique VLAN ID Which action wilt ensure that Host C will communicate with host A and Host B?
- A. Configure all switch ports connecting to the host devices as trunk ports associated with all VLANS.
- B. Configure all switch ports connecting to the host devices as access ports associated with a common VLAN.
- C. Configure a port-based ACL that permits inter-VLAN routing for all configured VLANs.
- D. Configure an IRB interface for each VLAN and associate it with its corresponding VLAN
Answer: B
NEW QUESTION 54
Click the Exhibit button.
Referring to the exhibit, what is the problem?
- A. LACP is required for LAG to work
- B. LAG requires more than two member links
- C. The LAG member interfaces are configured across different line cards
- D. Aggregated interfaces must be defined under the chassis stanza
Answer: D
NEW QUESTION 55
You want to advertise only a default route into a new area, which will be called area 7.
In this scenario, which configuration statement would solve this problem?
- A. user@host# set protocols ospf area 0.0.0.7 stub
- B. user@host# set protocols ospf area 0.0.0.7 stub default-metric 10
- C. user@host# set protocols ospf area 0.0.0.7 nssa default-lsa default-metric10
- D. user@host# set protocols ospf area 0.0.0.7 stub no-summaries
Answer: C
NEW QUESTION 56
Which Junos feature allows you to combine multiple interfaces into a single bundle?
- A. LAG
- B. VRRP
- C. NSB
- D. Virtual Chassis
Answer: A
NEW QUESTION 57
Referring to the exhibit, which policy will export routes to IBGP peers?
- A. static-1
- B. static.c-2
- C. staric-4
- D. scatic-2
Answer: C
NEW QUESTION 58
You want to use filter-based forwarding (FBF) to forward traffic sourced from subnet 10.0.0.0/24 to a specific destination.
Which two routing instance types would enable you to accomplish this task? (Choose two.)
- A. forwarding
- B. virtual router
- C. virtual switch
- D. virtual routing and forwarding
Answer: A,B
NEW QUESTION 59
What are two characteristics of IS-IS CSNPs? (Choose two.)
- A. IS-IS CSONs contains header information for all link-state PDUs.
- B. IS-IS CSPNs are used to maintain the link-state database synchronization.
- C. IS-IS CSPNs contain header information for specific requested link-state PDUs.
- D. IS-IS CSPNs are used to request a copy of a missing link state PDU.
Answer: A,B
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/concept/is-is-routing-overview.html
NEW QUESTION 60
Referring to the exhibit, why is the route for 10.5.5.5 hidden?
- A. It is a Martian route.
- B. It is an L3VPN route.
- C. The next hop cannot be resolved.
- D. It has an invalid community.
Answer: C
NEW QUESTION 61
Exhibit.
Referring to the exhibit, why is the route for 10.5.5.5 hidden?
- A. It is a Martian route.
- B. It is an L3VPN route.
- C. The next hop cannot be resolved.
- D. It has an invalid community.
Answer: C
NEW QUESTION 62
Host-1 was recently added in the network and is attached to ge-0/0/10 on Switch-A.
Host-1 is powered on and has its interface configured with default Layer 2 settings and an IP
address on the 172.17.12.0/24 IP subnet.
Host-1's MAC address is not shown in Switch-A's bridging table.
What are three explanations for this state? (Choose three.)
- A. The ge-0/0/10 interface does not have an associated IRB.
- B. The ge-0/0/10 interface has not received any traffic from Host-1.
- C. The ge-0/0/10 interface is configured as a trunk port.
- D. The ge-0/0/10 interface is configured as an access port.
- E. The ge-0/0/10 interface is not operationally or administratively up.
Answer: A,B,E
NEW QUESTION 63
......
Verified Pass JN0-349 Exam in First Attempt Guaranteed: https://www.examslabs.com/Juniper/JNCIS-ENT/best-JN0-349-exam-dumps.html
Free JN0-349 Sample Questions and 100% Cover Real Exam Questions: https://drive.google.com/open?id=1kPRBimYUOwmfRyITvZyDDg8kLuCKEmiv