300-715 Dumps PDF New [2022] Ultimate Study Guide
300-715 Exam Dumps PDF Updated Dump from ExamsLabs Guaranteed Success
Exam Details
Cisco doesn’t reveal the detailed information about its exams, so it is impossible to know the exact number of questions as well as their formats before sitting for the test. The students will have 90 minutes of allocated time to complete all the questions. This certification exam is proctored through the Pearson VUE platform and delivered in two languages: English and Japanese. To make an appointment, the applicants are required to pay the registration fee of $300.
The individuals planning to take the Cisco 300-715 test are recommended to complete the official training course, Implementing and Configuring Cisco Identity Services Engine (SISE) v3.0, available on the vendor’s website. This is a 5-day course that helps the candidates build a proper knowledge base to tackle the exam questions.
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) BYOD
The following will be discussed in CISCO 300-715 dumps pdf:
- Configure Cisco ISE Compliance Services
- Create Cisco ISE Profiling Reports
- Test and Monitor Compliance-Based Access
- Configure Policy Sets
- Configure TACACS+ Command Authorization
- Access the SISE Lab and Install ISE 2.4
- Configure Guest Access
- Configure sponsor and guest portals
- Configure Basic Policy on Cisco ISE
- Configure web authentication
- Create Guest Reports
- Configure BYOD
- Configure Guest Access Operations
- Blacklisting a Device
- Customize the Cisco ISE Profiling Configuration
- Configure Profiling
- Configure Client Provisioning
- Configure Initial Cisco ISE Setup, GUI Familiarization, and System Certificate Usage
- Configure Access Policy for Easy Connect
- Configure Cisco ISE for Basic Device Administration
- Test Compliance Policy
- Integrate Cisco ISE with Active Directory
- Configure Posture Policies
- Configure guest access services
NEW QUESTION 37
A network engineer is configuring guest access and notices that when a guest user registers a second device for access, the first device loses access What must be done to ensure that both devices for a particular user are able to access the guest network simultaneously?
- A. Create an Adaptive Network Control policy to increase the number of devices
- B. Modify the guest type to increase the number of maximum devices
- C. Configure the sponsor group to increase the number of logins.
- D. Use a custom portal to increase the number of logins
Answer: B
Explanation:
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_admin_guide_27/b_ise_admin_guide_27_chapter_01111.html.xml
NEW QUESTION 38
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 39
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when preventing users with hypervisor
- B. when passing IP phone authentication
- C. when allowing a hub with multiple clients connected
- D. when allowing multiple IP phones to be connected
Answer: C
Explanation:
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%2Dauthentication%20host%20mode%3A%20You,allows%20multiple%20source%20MAC%20addresses.
NEW QUESTION 40
An administrator is adding a switch to a network that is running Cisco ISE and is only for IP Phones The phones do not have the ability to authenticate via 802 1X Which command is needed on each switch port for authentication?
- A. mab
- B. enable network-authentication
- C. dot1x system-auth-control
- D. enable bypass-mac
Answer: A
Explanation:
Reference:
https://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_aaa/configuration/15-2mt/sec-config-mab.html
NEW QUESTION 41
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two)
- A. guest AUP
- B. BYOD
- C. hotspot
- D. new AD user 802 1X authentication
Answer: B,D
NEW QUESTION 42
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Enter the IP address of the device
- B. Enter the common name
- C. Select the certificate template
- D. Location the CSV file for the device MAC
- E. Choose the hashing method
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0- Certificate-Provisioning-Portal.html
NEW QUESTION 43
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?
- A. EAP server
- B. authenticator
- C. client
- D. supplicant
Answer: D
NEW QUESTION 44
In which two ways can users and endpoints be classified for TrustSec?
(Choose Two.)
- A. dynamic
- B. SGACL
- C. QoS
- D. VLAN
- E. SXP
Answer: B,D
NEW QUESTION 45
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?
- A. user-presented certificate and a certificate stored in Active Directory
- B. subject alternative name and the common name
- C. user-presented password hash and a hash stored in Active Directory
- D. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
Answer: B
Explanation:
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user. https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html
NEW QUESTION 46
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two.)
- A. guest AUP
- B. BYOD
- C. posture
- D. hotspot
- E. new AD user 802 1X authentication
Answer: C,E
NEW QUESTION 47
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 48
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
NEW QUESTION 49
What is the purpose of the ip http server command on a switch?
- A. It enables MAB authentication on the switch.
- B. It enables dot1x authentication on the switch.
- C. It enables the https server for users for web authentication.
- D. It enables the switch to redirect users for web authentication.
Answer: A
Explanation:
Section: Web Auth and Guest Services
NEW QUESTION 50
Which two task types are included in the Cisco ISE common tasks support for TACACS+ profiles? (Choose two.)
- A. WLC
- B. Shell
- C. ASA
- D. IOS
- E. Firepower
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html TACACS+ Profile TACACS+ profiles control the initial login session of the device administrator. A session refers to each individual authentication, authorization, or accounting request. A session authorization request to a network device elicits an ISE response. The response includes a token that is interpreted by the network device, which limits the commands that may be executed for the duration of a session. The authorization policy for a device administration access service can contain a single shell profile and multiple command sets. The TACACS+ profile definitions are split into two components:
Common tasks
Custom attributes
There are two views in the TACACS+ Profiles page (Work Centers > Device Administration > Policy Elements > Results > TACACS Profiles)--Task Attribute View and Raw View. Common tasks can be entered using the Task Attribute View and custom attributes can be created in the Task Attribute View as well as the Raw View.
The Common Tasks section allows you to select and configure the frequently used attributes for a profile. The attributes that are included here are those defined by the TACACS+ protocol draft specifications. However, the values can be used in the authorization of requests from other services. In the Task Attribute View, the ISE administrator can set the privileges that will be assigned to the device administrator. The common task types are:
Shell
WLC
Nexus
Generic
The Custom Attributes section allows you to configure additional attributes. It provides a list of attributes that are not recognized by the Common Tasks section. Each definition consists of the attribute name, an indication of whether the attribute is mandatory or optional, and the value for the attribute. In the Raw View, you can enter the mandatory attributes using a equal to (=) sign between the attribute name and its value and optional attributes are entered using an asterisk (*) between the attribute name and its value. The attributes entered in the Raw View are reflected in the Custom Attributes section in the Task Attribute View and vice versa. The Raw View is also used to copy paste the attribute list (for example, another product's attribute list) from the clipboard onto ISE. Custom attributes can be defined for nonshell services.
NEW QUESTION 51
What must be configured on the Cisco ISE authentication policy for unknown MAC addresses/identities for successful authentication?
- A. drop
- B. pass
- C. reject
- D. continue
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_id_stores.html
NEW QUESTION 52
An engineer is configuring web authentication and needs to allow specific protocols to permit DNS traffic.
Which type of access list should be used for this configuration?
- A. standard ACL
- B. extended ACL
- C. reflexive ACL
- D. numbered ACL
Answer: B
NEW QUESTION 53
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE.
What must be configured within Cisco ISE to accomplish this goal?
- A. Add the root certificate authority to the trust store and enable it for authentication.
- B. Create a certificate signing request and have the root certificate authority sign it.
- C. Add an OCSP profile and configure the root certificate authority as secondary.
- D. Create an SCEP profile to link Cisco ISE with the root certificate authority.
Answer: D
Explanation:
Explanation
Ref:https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-pr
NEW QUESTION 54
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE. What must be configured within Cisco ISE to accomplish this goal?
- A. Add the root certificate authority to the trust store and enable it for authentication.
- B. Create a certificate signing request and have the root certificate authority sign it.
- C. Add an OCSP profile and configure the root certificate authority as secondary.
- D. Create an SCEP profile to link Cisco ISE with the root certificate authority.
Answer: D
Explanation:
Reference:
Ref:https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
NEW QUESTION 55
Which personas can a Cisco ISE node assume?
- A. administration, policy service, gatekeeping
- B. administration, policy service, and monitoring
- C. policy service, gatekeeping, and monitoring
- D. administration, monitoring, and gatekeeping
Answer: B
Explanation:
Section: Architecture and Deployment
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html
NEW QUESTION 56
......
Pass Your Cisco Exam with 300-715 Exam Dumps: https://www.examslabs.com/Cisco/CCNPSecurity/best-300-715-exam-dumps.html
300-715 Exam Dumps - Cisco Practice Test Questions: https://drive.google.com/open?id=1p5qxlYOGpoHTz5_pHs9xYcy4B123vr9K