100% Real 300-820 dumps - Brilliant 300-820 Exam Questions PDF
300-820 Exam PDF [2025] Tests Free Updated Today with Correct 210 Questions
Here is a procedure to register for Cisco 300-820 Exam
In order to book the 300-820 Exam, You have to follow these steps
Step 3: Search for Cisco 300-820 Certifications Exam
Step 1: Visit to Pearson VUE Exam Registration
Step 2: Signup/Login to Pearson VUE account
Step 4: Select Date, time and confirm with a payment method
NEW QUESTION # 115
Refer to the exhibit.
Refer to the exhibit. An engineer is configuring Cisco Expressway-C to discover Cisco UCM by using an IP address and a TCP connection. After the configuration is saved, errors occur.
Which two changes must be made to resolve the errors? (Choose two.)
- A. Configure an application user with Cisco Computer Telephony Integration-enabled privileges in Cisco UCM.
- B. Upload a valid Cisco Tomcat certificate from the Cisco UCM to Expressway-C.
- C. Configure an application user with Administrative XML privileges in Cisco UCM.
- D. Set TLS verify mode to Off.
- E. Configure an HTTP allow list that contains the Cisco UCM
Answer: C,D
NEW QUESTION # 116
Refer to the exhibit.
When a Jabber user attempts to connect from outside of the organization, the user enters the login information as "[email protected]" and receives the error "Cannot find your services Automatically". The engineer tries to resolve SRV records used by Jabber.
DNS A record "expressway-e.example.com" points to the Expressway-E IP and "cucm.example.com" points to the Cisco Unified Communications Manager.
Which change resolves the DNS problem?
- A. Change the collab-edge record to point to 5061.
- B. Remove the cisco-uds SRV record for the external DNS.
- C. Change the priority of the SRV record for cisco-uds.
- D. Change cisco-uds to point to the Expressway-E FQDN.
Answer: B
NEW QUESTION # 117
Refer to the exhibit.
An ISDN gateway is registered to Expressway-C with a prefix of 9 and/or it has a neighbor zone specified that routes calls starting with a 9.
Which value should be entered into the "Source" field to prevent toll fraud regardless at origin of the call?
- A. All
- B. Any
- C. Neighbor Zone
- D. Traversal Zone
Answer: A
NEW QUESTION # 118
When the network requirements are configured for a new Video Mesh deployment, which firewall ports are required so that Video Mesh cascade signaling succeeds?
- A. UDP 33432 through 33433
- B. UDP 5004 and 5005
- C. TCP 443 and 444
- D. TCP 443 and 8443
Answer: D
NEW QUESTION # 119
Which zone is required on a B2B deployment between Expressway-C and Expressway-E?
- A. default zone
- B. DNS zone
- C. neighbor zone
- D. traversal zone
Answer: D
NEW QUESTION # 120
Which attribute in the SDP for a call is affected by the static NAT address configuration in an Expressway-E?
- A. version
- B. bandwidth
- C. name
- D. connection
Answer: D
Explanation:
c-line shows the connection information, Media IP address.
NEW QUESTION # 121
Refer to the exhibit. Logins and failing via mobile and remote access. How is this resolved?
- A. Although a traversal client zone exists, there is no Unified Communications traversal client zone. One must be created.
- B. No Cisco UCM servers are configured in the Expressway-C. Servers must be added for CallManager and IM and Presence services.
- C. SIP is disabled on the Expressway-E. The SIP protocol must be enabled on the server.
- D. Mobile and remote access login has not been enabled for the domain configured in the Expressway-C. The domain must be edited to allow Cisco UCM registrations.
Answer: B
NEW QUESTION # 122
When an Expressway-E is configured for static NAT, which Session Description Protocol attribute is modified to reflect the NAT address?
- A. SDP c-line
- B. SIP record route
- C. SDP m-line
- D. SDP b-line
Answer: A
Explanation:
c-line shows the connection information, Media IP address. So if it is Nat it will be reflected there.
NEW QUESTION # 123
Which mechanism does TLS use to validate identity?
- A. shared secret
- B. username and a password
- C. server certificate
- D. IP address of the peer
Answer: A
NEW QUESTION # 124
Drag and drop the required SAN field items from the left onto the features within the server categories on the right.
Answer:
Explanation:
NEW QUESTION # 125
An engineer must fix broken SSH tunnels between Expressway-C (192.168.10.5) and Expressway-E (192.168.20.5). The engineer is advised that the packet capture shows the required packets for the SSH tunnels leaving the Expressway-C but not reaching the Expressway-E. Which firewall configuration must the engineer allow to resolve this issue?
- A. port 7001 from Expressway-C to Expressway-E
- B. port 2222 from Expressway-C to Expressway-E
- C. port 7001 from Expressway-E to Expressway-C
- D. port 2222 from Expressway-E to Expressway-C
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/config_guide/X12-
5/exwy_b_mra-expressway-deployment-guide/exwy_b_mra-expressway-deployment- guide_chapter_0100.html
NEW QUESTION # 126
When designing the call control on a Cisco Expressway Core, which is the sequence of dial plan functions?
- A. search rules, zones, local zones
- B. DNS zone, local zone, search rules
- C. search rules, transforms
- D. transforms, CPL, user policy, search rules
Answer: D
NEW QUESTION # 127
An engineer is deploying an Expressway solution for the SIP domain Cisco.com.
Which SRV record should be configured in the public DNS to support inbound B2B calls?
- A. _cuplogin._tcp.cisco.com
- B. _collab-edge._tls.cisco.com
- C. _cisco-uds._tcp.cisco.com
- D. _sip._tcp.cisco.com
Answer: D
NEW QUESTION # 128
An engineer noticed that internal participants using Full HD endpoints are joining meetings hosted in the Video Mesh node. The quality of the calls is 720p. What must the engineer configure to support 1080p quality?
- A. Set the "Enhanced Layout Experience" within the Video Mesh settings in Cisco Webex Control Hub to 1080P HD video.
- B. Turn on the "Enable 1080P HD video for all participants hosted on on-premises Video Mesh nodes" setting in the Cisco Webex Control Hub.
- C. Set the "Received Video Resolution" on the Video Mesh node to maximum.
- D. Turn on the "Highest Detail, Best Motion: 1080P" setting in the Cisco Webex Control Hub.
Answer: D
NEW QUESTION # 129
Which DNS record and port combination must be resolved externally for Mobile and Remote Access to be used?
- A. _cisco-uds on port 8443
- B. _collab-edge on port 8443
- C. _cisco-uds-edge on port 5061
- D. _collab-edge on port 5061
Answer: B
NEW QUESTION # 130
Which step is taken when configuring a Cisco Expressway solution?
- A. Enable static NAT on the Expressway-E only.
- B. Enable H.323 H.460.19 demultiplexing mode on the Expressway-C.
- C. Disable H.323 mode on the Expressway-E.
- D. Configure the Expressway-E by using a non-traversal server zone.
Answer: A
NEW QUESTION # 131
......
The Implementing Cisco Collaboration Cloud and Edge Solutions certification exam covers various topics including Cisco Webex Calling, Cisco Unified Communications Manager (UCM), Cisco Expressway, Cisco Webex Teams, and Cisco Meeting Server. It is a 90-minute exam that consists of 60-70 questions and is available in English and Japanese. 300-820 exam tests the candidate's ability to configure, implement, and troubleshoot Cisco collaboration cloud and edge solutions. Implementing Cisco Collaboration Cloud and Edge Solutions certification validates the candidate's expertise in implementing Cisco collaboration solutions, which can help them in advancing their career in the field of networking and collaboration.
Verified & Correct 300-820 Practice Test Reliable Source Nov 22, 2025 Updated: https://www.examslabs.com/Cisco/CCNP-Collaboration/best-300-820-exam-dumps.html
Cisco 300-820 Exam Preparation Guide and PDF Download: https://drive.google.com/open?id=1wNh723d2GKPElWEQLigPvhVeKZZjzKO2