Get Started: 300-610 Exam [2025] Dumps Cisco PDF Questions
300-610 Premium Exam Engine pdf Download
Cisco 300-610 exam covers various topics that are essential for designing Cisco Data Center Infrastructure. These topics include the design of network infrastructure, computing infrastructure, storage infrastructure, automation, security, and application infrastructure. Therefore, passing 300-610 exam requires a broad understanding of all these topics, and it is essential to prepare adequately before taking the exam.
NEW QUESTION # 130 
Refer to the exhibit. An engineer must deploy NEW-VRF-001 in the data center. All hosts require full reachability with all other hosts, no matter on which pod the host deployment occurs. Which set of commands must the engineer include in the deployment?
- A. address-family I2vpn evpn
route-target both auto - B. route-target both auto evpn
route-target both auto - C. advertise I2vpn evpn
route-taraet both auto - D. host-reachability protocol bgp
advertise I2vpn evpn
Answer: C
NEW QUESTION # 131
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of L3Out
- B. NAT appliance
- C. subnet address of BD2
- D. subnet address of BD1
Answer: B
NEW QUESTION # 132
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Add an additional FCoE VLAN to the SAN network.
- B. Increase the queuing buffer in the port-channel interface connected to the storage array.
- C. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
- D. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
Answer: B
NEW QUESTION # 133
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-pod over MP-BGP EVPN
- B. Multi-pod over OSPF EVPN
- C. Multi-cloud
- D. Multi-site
Answer: D
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION # 134
A network engineer needs to design Layer 2 connectivity for a subnet between two data centers using VXLAN with Cisco Nexus switches. The engineer must ensure seamless host mobility and optimal first-hop routing. Which gateway MAC attribute must be synchronized across both data centers?
- A. VRRP
- B. multicast
- C. anycast
- D. HSRP
Answer: C
Explanation:
Cisco's VXLAN Anycast Gateway uses the same virtual MAC address on the IRB interfaces in both data centers. Synchronizing that Anycast MAC ensures that hosts in either site always see the same default-gateway MAC - preserving ARP entries during VM moves and providing optimal, local first-hop routing.
NEW QUESTION # 135
Refer to the exhibit. An engineer needs a solution to extend Fibre Channel traffic between multiple sites. The IPsec tunnels must be used to encrypt and secure the traffic. Which technology must be selected to meet these requirements?
- A. VXLAN
- B. FCIP
- C. FCoE
- D. iSCSI
Answer: B
NEW QUESTION # 136
An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B- Series servers. Which solution should be included to meet these requirements?
- A. Pin the IOM ports of the service profile to dedicated server ports.
- B. Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports.
- C. Pin the server ports of the service profile to dedicates uplink ports.
- D. Pin the vNlCs and vHBAs of the service profile to dedicated server ports
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2
/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_010.
html#concept_7DE33CE2E37A47C6992C012D51CA37D4
NEW QUESTION # 137
An organization deploys Cisco UCS-X Series servers in the data center. The deployment must have optimal BIOS configuration to maximize performance for memory-intensive applications. The organization must set the BIOS options to achieve low-latency operation and enhanced memory bandwidth. Which BIOS tuning option on Cisco UCS-X Series servers is needed for memory-intensive workloads?
- A. Configure "Virtualization Extensions" to improve performance for hypervisor-based environments.
- B. Disable "Turbo Boost" to stabilize performance and reduce heat generation.
- C. Set "NUMA Optimization" to enhance memory locality for latency-sensitive applications.
- D. Enable "Processor C-States" for better power efficiency during high-performance workloads.
Answer: C
NEW QUESTION # 138
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. type of storage
- B. FCoE protocol
- C. N Port virtualization
- D. end-to-end oversubscription ratio
Answer: D
NEW QUESTION # 139
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.
* The customer's environment requires the script to authenticate before executing further actions.
* The customer's security requirements mandate the use of HTTP transport.
* The automation team is familiar with parsing messages encoded in XML or JSON format.
Which solution meets these requirements?
- A. RESTCONF
- B. gRPC
- C. NX-API
- D. SNMPv3
Answer: C
NEW QUESTION # 140
An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used.
Which technology must be used to support these requirements?
- A. GRE
- B. OTV
- C. MACsec
- D. IPsec
Answer: C
Explanation:
Reference:
https://developers.redhat.com/blog/2016/10/14/macsec-a-different-solution-to-encrypt-network-traffic/
NEW QUESTION # 141
Which type of port should be used on a Cisco Nexus 7700 Switch for OOB management that uses Layer 3 and supports authentication and encryption?
- A. Ethernet
- B. CMP
- C. console
- D. management
Answer: D
NEW QUESTION # 142
Refer to the exhibit. The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection. The traffic types are:
- internet traffic to application servers
- internet traffic to corporate users
- partner network traffic to application servers
- partner network traffic to corporate users
Where must the next-generation firewalls be inserted to implement the new policy?
- A. one-armed insertion from the ACl border leaf duster
- B. inline insertion between the user network switch cluster and the core cluster
- C. inline insertion between the edge router duster and the core switch duster
- D. one-armed insertion from the core switch cluster
Answer: A
NEW QUESTION # 143
A Cisco engineer is developing a custom application that can run natively in Cisco NX-OS on Nexus 9000 and Nexus 3000 platforms For the NX-SDK application to run the engineer enables the NX-SDK feature on the device Then the NX-SDK is imported into the application via an import nx_sdk_py statement. The engineer creates custom CLI commands and defines custom CLI command syntax within the sdkThread function When CLI commands originate from an NX-SDK application what class is this?
- A. pyCmdhandler
- B. nx_sdk_pyValid-to_int
- C. postCliCb
- D. clicm.printConsole
Answer: A
NEW QUESTION # 144
DRAG DROP
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Select and Place:
Answer:
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 145
A network architect wants to automate data center LAN configuration by use of Kubernetes, aligned with Cisco best practices for underlay and overlay provisioning The automation must be able to operate in high-availability mode with active/active operation between hosts in dual data centers. Which configuration approach must the architect choose?
- A. OpenFlow
- B. Cisco Nexus Dashboard Fabric Controller
- C. Cisco OpFlex
- D. APIC-EM CLI
Answer: B
NEW QUESTION # 146
An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?
- A. Perl
- B. Python
- C. YAML
- D. Bash
Answer: B
Explanation:
D18912E1457D5D1DDCBD40AB3BF70D5D
NEW QUESTION # 147
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 148
Which orchestration tool must be used to manage VXLAN fabrics and includes a built-in dashboard and real-time network health summary for managed devices?
- A. Ansible
- B. Cisco Nexus Dashboard Fabric Controller
- C. Cisco Intersight
- D. Puppet
Answer: B
NEW QUESTION # 149
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?
- A. Control group
- B. ARP filter
- C. FHRP filter
- D. Data group
Answer: C
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/guide_c07-728315.pdf
NEW QUESTION # 150
An engineer must develop a Python tool to automate software upgrades of both data center and non-data center devices.
All devices offer a RESTful API and require a JSON or XML payload Vendor-specific libraries must be avoided.
Which library must the engineer choose?
- A. ncciient
- B. Netmiko
- C. requests
- D. Nornir
Answer: C
NEW QUESTION # 151
A network architect wants to automate data center LAN configuration by use of Kubernetes, aligned with Cisco best practices for underlay and overlay provisioning. The automation must be able to operate in high-availability mode with active/active operation between hosts in dual data centers. Which configuration approach must the architect choose?
- A. OpenFlow
- B. Cisco Nexus Dashboard Fabric Controller
- C. Cisco OpFlex
- D. APIC-EM CLI
Answer: B
Explanation:
The Nexus Dashboard Fabric Controller (formerly DCNM) provides a Kubernetes-integrated automation framework that natively orchestrates both underlay (BGP/IP-EVPN) and overlay (VXLAN) fabrics per Cisco best practices. It runs in active/active high-availability across sites, enabling hosts in dual data centers to be provisioned concurrently and consistently via Kubernetes CRDs without manual CLI scripting or legacy SDN protocols like OpenFlow.
NEW QUESTION # 152
A network engineer needs to configure a high availability feature for a data center that uses a Cisco Nexus 7700 Series Switch that is configured with dual supervisors. The feature must meet these requirements:
* Network resilience must be ensured.
* Network instability for Layer 3 external routing protocols must be reduced.
* Neighbors must be notified when the control plane is restarting.
* Traffic must still be forwarded to peers while neighbor relationships arc restarting.
What should be used to meet these requirements?
- A. BFD
- B. graceful restart
- C. NSF
- D. NSR
Answer: D
NEW QUESTION # 153
......
Cisco 300-610 certification exam is a challenging exam that requires extensive preparation and knowledge of the latest data center technologies. 300-610 exam covers various topics such as Cisco Data Center Network Architecture, Data Center Management and Operations, and Data Center Infrastructure Design. 300-610 exam also verifies that the candidate has the expertise to design data center infrastructure solutions for both traditional and modern applications.
Cisco 300-610 exam is designed for IT professionals who have experience in data center technologies and want to advance their careers in data center design. 300-610 exam covers a wide range of topics, including data center network design, storage networking, data center compute connectivity design, and data center virtualization. 300-610 exam also covers the latest trends and technologies in data center design, such as Cisco Application Centric Infrastructure (ACI) and Cisco Unified Computing System (UCS).
Pass Your Cisco Exam with 300-610 Exam Dumps: https://www.examslabs.com/Cisco/CCNP-Data-Center/best-300-610-exam-dumps.html
Verified 300-610 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1ELsPI-FEzvs6mhWeCBk49ZxTAqG2Nc9l