2026 300-715 Dumps PDF - 300-715 Real Exam Questions Answers
Valid 300-715 Test Answers & Cisco 300-715 Exam PDF
The Cisco 300-715 exam consists of multiple-choice questions, drag and drop, and simulation-based questions. The duration of the exam is 90 minutes, and it can be taken in English or Japanese. The candidates must score at least 750 out of 1000 to pass the exam.
NEW QUESTION # 64
An administrator is adding network devices for a new medical building into Cisco ISE. These devices must be in a network device group that is identifying them as "Medical Switch" so that the policies can be made separately for the endpoints connecting through them. Which configuration item must be changed in the network device within Cisco ISE to accomplish this goal?
- A. Change the model name to Medical Switch.
- B. Change the device profile to Medical Switch.
- C. Change the device type to Medical Switch.
- D. Change the device location to Medical Switch.
Answer: C
Explanation:
It should be Device Type, Medical Switch could be located on any floor or any room.
NEW QUESTION # 65
What should be considered when configuring certificates for BYOD?
- A. The CN field is populated with the endpoint host name.
- B. An endpoint certificate is mandatory for the Cisco ISE BYOD
- C. The SAN field is populated with the end user name
- D. An Android endpoint uses EST whereas other operation systems use SCEP for enrollment
Answer: A
Explanation:
When configuring certificates for Bring Your Own Device (BYOD), it is important to consider populating the CN (Common Name) field with the endpoint host name. The CN field should contain the host name or FQDN (Fully Qualified Domain Name) of the endpoint device. This allows the certificate to be properly validated when the device connects to the network. The CN field helps ensure that the device is correctly identified and authorized for network access.
NEW QUESTION # 66
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION # 67 
Refer to the exhibit. An engineer needs to configure central web authentication on the Cisco Wireless LAN Controller to use Cisco ISE for all guests connected to the wireless network. The components are configured already:
* Cisco Wireless LAN Controller is fully configured
* authorization profile on the Cisco ISE
* authentication policy on the Cisco ISE
Which component would be configured next on Cisco ISE?
- A. authorization rule
- B. authentication profile
- C. authorization policy
- D. accounting profile
Answer: C
NEW QUESTION # 68
An administrator must block access to BYOD endpoints that were onboarded without a certificate and have been reported as stolen in the Cisco ISE My Devices Portal. Which condition must be used when configuring an authorization policy that sets DenyAccess permission?
- A. Endpoint Identity Group is Blocklist, and the BYOD state is Registered.
- B. Endpoint Identify Group is Blocklist, and the BYOD state is Pending.
- C. Endpoint Identity Group is Blocklist, and the BYOD state is Reinstate.
- D. Endpoint Identity Group is Blocklist, and the BYOD state is Lost.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/admin_guide/b_ISE_26_admin_guide/b_ISE_admin_26_byod.html
NEW QUESTION # 69
A technician must configure MAB on an access switch. Due to a protocol error, the engineer discovers that MAB cannot authenticate. For MAB to function, which protocol must be enabled in the authorized protocol lists?
- A. MS-CHAPv2
- B. EAP-TLS
- C. CHAP
- D. Process Host Lookup
Answer: D
NEW QUESTION # 70
A network engineer is in the predeployment discovery phase of a Cisco ISE deployment and must discover the network. There is an existing network management system in the network.
Which type of probe must be configured to gather the information?
- A. NMAP
- B. RADIUS
- C. SNMP
- D. NetFlow
Answer: C
NEW QUESTION # 71
An enterprise uses a separate PSN for each of its four remote sites. Recently, a user reported receiving an
"EAP-TLS authentication failed" message when moving between remote sites. Which configuration must be applied on Cisco ISE?
- A. Add the device to all PSN nodes in the deployment.
- B. Renew the expired certificate on one of the PSN.
- C. Use a third-party certificate on the network device.
- D. Configure an authorization profile for the end users.
Answer: B
Explanation:
When using separate PSNs for different sites, the network device must be added to all PSN nodes in the deployment, so that the device can communicate with the appropriate PSN based on the location of the user1.
If the device is not added to all PSN nodes, the user may encounter an EAP-TLS authentication failure when moving between sites, as the device may not be able to reach the PSN that issued the certificate2. The other options are not relevant for this scenario, as they do not address the issue of PSN communication.
NEW QUESTION # 72
Select and Place
Answer:
Explanation:
NEW QUESTION # 73
An ISE administrator must change the inactivity timer for MAB endpoints to terminate the authentication session whenever a switch port that is connected to an IP phone does not detect packets from the device for 30 minutes. Which action must be taken to accomplish this task?
- A. Add the authentication timer reauthenticate server command to the switchport.
- B. Change the idle-timeout on the Radius server to 3600 seconds for IP Phone endpoints.
- C. Add the authentication timer inactivity 3600 command to the switchport.
- D. Configure the session-timeout to be 3600 seconds on Cisco ISE.
Answer: B
Explanation:
The inactivity timer for MAB can be statically configured on the switch port, or it can be dynamically assigned using the RADIUS Idle-Timeout attribute (Attribute 28). Cisco recommends setting the timer using the RADIUS attribute because this approach lets gives you control over which endpoints are subject to this timer and the length of the timer for each class of endpoints.
For example, endpoints that are known to be quiet for long periods of time can be assigned a longer inactivity timer value than chatty endpoints.
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_1-
99/MAB/MAB_Dep_Guide.html#wp392385
NEW QUESTION # 74
An engineer must use Cisco ISE to provide network access to endpoints that cannot support 802.1X. The endpoint MAC addresses must be allowlisted by configuring an endpoint identity group. These configurations were performed:
Configured an identity group named allowlist
Configured the endpoints to use the MAC address of incompatible 802.1X devices Added the endpoints to the allowlist identity group Configured an authentication policy for MAB users What must be configured?
- A. Authorization profile that has the PermitAccess permission and matches the allowlist identity group
- B. Authentication profile that has the PermitAccess permission and matches the allowlist identity group
- C. Authorization policy that has the PermitAccess permission and matches the allowlist identity group
- D. Logical profile that matches the allowlist identity group based on the configured policy
Answer: C
NEW QUESTION # 75
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. high-impact
- B. low-impact
- C. open
- D. closed
Answer: B
Explanation:
https://www.lookingpoint.com/blog/cisco-ise-wired-802.1x-deployment-monitormode#:~:text=Low%
20impact%20mode%20works%20similar,DHCP%2C%20PXE%20boot%2C%20etc.
NEW QUESTION # 76
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services. This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide_14_chapter_011.html#ID57
NEW QUESTION # 77
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. SNMP query probe
- B. DNS probe
- C. NetFlow probe
- D. DHCP SPAN probe
- E. RADIUS probe
Answer: A,E
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION # 78
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE.
What must be done to accomplish this configuration?
- A. Enable the privilege levels in the IOS devices
- B. Define the command privileges for levels 2-5 in Cisco ISE
- C. Define the command privileges for levels 2-5 in the IOS devices
- D. Enable the privilege levels in Cisco ISE
Answer: B
Explanation:
The command privileges for 2 - 5 are defined in ISE, not on the IOS device. If the IOS device defines the command privileges, then why do we even need ISE. When ISE is centrally managing the network devices, it configures the command privileges and the shell profile.
NEW QUESTION # 79
A network engineer needs to deploy 802.1x using Cisco ISE in a wired network environment where thin clients download their system image upon bootup using PXE. For which mode must the switch ports be configured?
- A. restricted
- B. monitor
- C. low-impact
- D. closed
Answer: C
NEW QUESTION # 80
What is needed to configure wireless guest access on the network?
- A. Captive Portal Bypass turned on
- B. valid user account in Active Directory
- C. WEBAUTH ACL for redirection
- D. endpoint already profiled in ISE
Answer: A
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference:
NEW QUESTION # 81
......
Cisco 300-715 certification exam is designed for IT professionals who plan, design, implement, operate, and troubleshoot complex Security technologies and solutions. 300-715 exam measures the candidate’s knowledge in implementing and configuring Cisco Identity Services Engine (ISE) solutions. The Cisco ISE is a security policy management platform that provides comprehensive visibility and control over users and devices accessing network resources.
300-715 Exam Dumps - PDF Questions and Testing Engine: https://www.examslabs.com/Cisco/CCNPSecurity/best-300-715-exam-dumps.html
Realistic 300-715 Exam Dumps with Accurate & Updated Questions: https://drive.google.com/open?id=1LLKhK7rpIHy57fxiXgZzsAwj8FXdtRb_