NACE-CIP2-001 by NACE Valid Free Exam Practice Test

Question 1

You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:

A. Use a generally accepted industry standard and to take readings B. Develop your own methodology and proceed take the readings C. Refuse to take readings until an is in place D. Call your supervisor

Correct Answer: A

Question 2

NACE International Standards are developed by:

A. Regional mandates B. International mandates C. Government mandates D. Standard committees

Correct Answer: D

Question 3

NACE Level 2 Inspectors have been authorized to perform:

A. Visual inspection only B. All types of inspection without supervision C. Visual inspection and Non-destructive testing D. Visual inspection, Non-Destructive and Destructive testing

Correct Answer: D

Question 4

The primary purpose of Fireproofing coatings are to provide:

A. fire extinguishing characteristics B. Explosion resistance C. Preferential fuel for the fire D. Temporary protection for the structure

Correct Answer: D

Question 5

Antifouling coatings are regulated by international treaties.

A. False B. True

Correct Answer: B

Question 6

Pre-cleaning of work pieces will NOT remove

A. mill scale. B. snow, ice or water. C. dirt. D. oil or grease.

Correct Answer: A

Question 7

You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:

A. Advise your QC Manager to change the ITP to the use of the salt smart meter B. Redo the pre-cleaning based on the other inspectors results C. Review the specification with the other inspector to see what method was specified D. Advise the other inspector he is using an incorrect method

Correct Answer: C

Question 8

The best choice of instrument for holiday testing of thick film concrete coatings is:

A. High Voltage DC Pulse Type B. High Voltage AC C. Low Voltage Sponge Type D. High Voltage DC Constant Current

Correct Answer: D

Question 9

A reinforced coating is

A. equally resistant to abrasion and impact as a non-reinforced coating. B. less resistant to movement, abrasion, and impact than a non-reinforced coating. C. equally resistant to movement and impact as a non-reinforced coating. D. more resistant to movement, abrasion, and impact than a non-reinforced coating.

Correct Answer: D

Question 10

You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:

A. Correct the errors yourself and suggest the Level 1 inspector be replaced B. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent C. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation D. Correct the errors yourself and submit the reports without any further action

Correct Answer: C

NACE Coating Inspector Level 2 - NACE-CIP2-001 Exam Practice Test