HP0-Y36 by HP Valid Free Exam Practice Test

Question 1

In your IRF stack, you execute the display bfd session command and confirm the BFD session is active. What does this outcome indicate about the status of your IRF stack?

A. The IRF stack is electing a new Slave. B. The IRF stack has split. C. The IRF priorities are set at default values. D. The IRF stack is performing as expected.

Correct Answer: B

Question 2

What is an advantage of PIM-SM over PIM-DM?

A. PIM-SM is more scalable. B. PIM-SM is less complex. C. PIM-SM does not require a unicast routing table. D. PIM-SM does not require a Layer 2 protocol such as IGMP.

Correct Answer: A

Question 3

What does VPLS in Kompella mode require?

A. full mesh of LDP peers B. full mesh of BGP peers C. full mesh of VPNv4 BGP peers D. full mesh of VPLS address family BGP peers

Correct Answer: D

Question 4

An HP A5500 Switch is to be moved from a lab environment and placed in operation within the access layer of the enterprise network. The desired configuration file, switch4config.cfg, is successfully copied from an FTP server into the flash of the A5500 Switch. When the switch is rebooted, the desired configuration does not take effect. What should you do to ensure the configuration file in flash becomes the current configuration when the switch is booted?

A. Delete the original configuration file. B. Indicate which configuration file to use with the boot-system command. C. Indicate which configuration file to use with the boot-loader command. D. Indicate which configuration file to use with the startup-configuration command.

Correct Answer: D

Question 5

Which technology in an MPLS L2VPN can provide ordered delivery of Ethernet frames?

A. Ethernet raw access circuit B. MPLS EXP bits C. VLAN pseudowire class D. Control Word E. TCP-based L2VPN

Correct Answer: D

Question 6

Click the Exhibit button and view both exhibits.

AS 20 advertises prefix 20.0.0.0 /8 and AS 30 advertises prefix 30.0.0.0 /8. On Router-1, what is the BGP Next Hop attribute for prefix 20.0.0.0 /8?

A. 16.3.3.3 B. 30.1.1.1 C. 16.0.0.2 D. 16.0.0.3 E. 20.1.1.1 F. 16.2.2.2

Correct Answer: E

Question 7

Click the Exhibit button and view both exhibits.

AS 20 advertises prefix 20.0.0.0 /8, and AS 30 advertises prefix 30.0.0.0 /8. On Router-3,
what is the BGP Next Hop attribute for prefix 20.0.0.0 /8?

A. 30.1.1.1 B. 16.2.2.1 C. 16.0.0.3 D. 20.1.1.1 E. 16.3.3.1 F. 16.0.0.1

Correct Answer: D

Question 8

What is the MAC address used to identify the LACP system MAC address for a Link Aggregation Group (LAG) configured on Switch 3 interface 2 and Switch 4 interface 2?

A. 0023-89d9-cde3 B. 0023-89d9-b50a C. 0023-89d9-1fa1 D. 0023-89d9-af07 E. 0023-89d9-af08

Correct Answer: D

HP Deploying HP Enterprise Networks - HP0-Y36 Exam Practice Test