API-1169 by API Valid Free Exam Practice Test

Question 1

All pipe installed off shore ,under water not more than 200 ft (60) meters deep but less than 12 ft must have ______ in cover of soil. ( except in the Gulf of Mexico and its inlets)
49 CFR 192.319

A. 48 B. 5 C. 36 D. 8

Correct Answer: C

Question 2

All B31.8 welders shall be requalified at least:
-every 6 months
-once each year
-prior to production
-Every 18 months

A. After cleaning B. Once each year C. Once each week D. In grid pattern

Correct Answer: D

Question 3

Submerged soil from which water is freely seeping

A. fract-out B. A C. Tag or documents certifying it has been inspected D. C

Correct Answer: D

Question 4

Calc the top width of a bell hole exc that is 8 ft deep and 6 ft wide. Soil C.

A. 48 B. 15% C. 30 D. 1

Correct Answer: C

Question 5

A specimen at failure is observed to have a strength greater than or equal to the SMTS of the pipe material and meets all soundness criteria but breaks in the weld or fusion zone. Is this weld acceptable
-No, failure in the fusion zone is cause for rejection
-Yes
-No, failure at weld is unacceptable
-Yes, if it passes nick-break test also
1104 5.6.2.3

A. The different types and agency jurisdiction B. a) superimposedb) the ends must be sealedd)protected / waterSubpart G 192.323 C. Yes D. 1:1

Correct Answer: C

Question 6

The major classes or respirators are?

A. The entire weld must be cut out. B. Atmosphere supplying, air purifying and self contained aparatus C. Site Specific test procedure D. 49 CFR 192.309

Correct Answer: D

Question 7

Examples of information discussed and exchange between Designated contacts include?

A. Management with regard to quality, can include establishing quality policies in quality objectives and processes to achieve these quality objectives through quality planning quality assurance quality control and quality improvement(ISO 9000 3.3.4) B. Document stating requirements(example quality manual, quality plan, technical drawing, procedure document, work instruction.)(ISO 9000 3.8.7) C. Is the entity that intends to install, operate, maintain a new pipeline that crosses existing pipeline facilities. The Crossing company may designate a third-party or parties to perform the task necessary to accomplish a Crossing but remains responsible for the work performed by such third parties. D. Placement of the ROW, Location of the existing of proposed pipelines within the ROW, the types of easement (exclusive, or open and undefined), construction methods and practices, unique landscape, terrain, or environmental situations, separation distances, restrictions on type in location of heavy equipment crossings, any potential pipeline integrity concerns, responsibility for cathodic protection after installation, the ground disturbance timing.

Correct Answer: B

Question 8

Each transmission line must have _________ inches of clearance from any other underground utility not related to the transmission line.

A. 12 B. 50 C. 30 D. 100

Correct Answer: A

Question 9

The overall intentions and direction of an organization related to quality as formally express by top management is?

A. The quality policy (iso 9000 6.5.8) B. The quality policy (iso 9000 7.5.8) C. The quality policy(ISO 9000 3.5.8) D. The quality policy (iso 9000 3.5.7)

Correct Answer: D

Question 10

Liquids having a flashpoint below 100 deg F are known as class _______ liquids.

A. B B. 30 C. 440 D. 1

Correct Answer: B

Question 11

Internal and external corrosion threats are typically managed by what type of pressure test?

A. A right of way(INGaA Crossing Guideline 11 M) B. A spike test, strength test and/or a leak test(API 1110, 4.1.3 a) C. Within a set of written process safety information controls(29 CFR 1910.119, general knowledge) D. That the trench is adequately sloped, and access/egress ladders are installed.(CEPA TABLE 74)

Correct Answer: B

Question 12

In a new gas line, a wrinkle bend may not be madeon steel pipe to be operated at a pressure that produces a hoop stress of ______ or more of SMYS
-30%
-40%
-20%
-50%

A. 30 % or more of SMYS B. 15 % or more of Smys C. 29 % or more of Smys D. 3 % or more of Smys

Correct Answer: C

Question 13

If the ends of an unvented casing are sealed and the sealing is strong enough to retain the MAOP, the casing must be designed to hold this pressure at a stress level of not more than ________ % of________.
49 CFR 192.323

A. 72/SMYS B. 67/smys C. 5 / 50 D. 49 cfr 192.505

Correct Answer: C

Question 14

The land base and data base for one call shall use?

A. Latitude/longitude coordinates (cga Best Practice 6.4) B. Latitude/longitude coordinates (cga Best Practice 7.2) C. Latitude/longitude coordinates (cga Best Practice 6.102) D. Latitude/longitude coordinates(CGA Best Practice 6.2)

Correct Answer: D

API Pipeline Construction Inspector - API-1169 Exam Practice Test