642-747 by Cisco Valid Free Exam Practice Test

Question 1

Which Cisco WLC debug command would allow you to determine if the certificate process is failing in the CAPWAP messages?

A. debug pm pki enable B. debug capwap events enable C. debug capwap errors enable D. debug capwap packet enable E. debug cert events enable

Correct Answer: A

Question 2

When planning on tracking rogue APs, RFID tags that are based on RSSI, and wireless clients, what is needed for the Cisco 3300 Series MSE v7.0?

A. wIPS license, context-aware license, and Cisco RFID tag license only B. wIPS license and context-aware license only C. wIPS license, context-aware license, and partner tag engine license only D. context-aware license only

Correct Answer: D

Question 3

Which two statements best describe the implementation of Cisco WCS v7.0 controller templates? (Choose two.)

A. Cisco WCS controller templates apply all Cisco WLC and AP parameters, following the similar menu structure of the controller GUI. B. Cisco WCS controller template parameters can only apply common parameters across controllers. C. Cisco WCS controller template parameters can be imported from Cisco WLC or exported to WLC from WCS. D. Cisco WCS controller template parameters can only be exported from WCS to Cisco WLC. E. Cisco WCS controller templates can apply common parameters and unique parameters such as IP addresses across controllers.

Correct Answer: C,E

Question 4

Which two options describe the extent to which Cisco WCS v7.0 can monitor an autonomous AP? (Choose two.)

A. shows only basic operational status via reachability of the AP management interface B. AP floor placement with no dynamic heat map C. shows only reachability, radio status, and channel, power D. shows only reachability and radio status E. AP floor placement with a dynamic heat map F. AP floor placement with no heat map G. shows reachability, radio status, channel, power, client count, and CDP status

Correct Answer: B,G

Question 5

Which two descriptions are examples of how location services can be adjusted at the Cisco WLC v7.0? (Choose two.)

A. Decrease RFID timeouts from defaults if tags are beaconing at 30 seconds. B. Disable wireless client tracking if there are no requirements for the respective locations of the controller APs. C. Increase RFID timeouts from defaults if tags are beaconing at 30 seconds. D. Disable RFID tag tracking if there are no tags in the respective locations of the controller APs.

Correct Answer: A,D

Question 6

A customer wants to deploy access points to several remote offices utilizing the HREAP capabilities of a WLC 5508. If the customer wants to do a HREAP group per remote office, what is the maximum number of HREAP groups that can exist?

A. 500 B. 250 C. 25 D. 100

Correct Answer: D

Question 7

Cisco WCS v7.0 using a Cisco 3300 Series MSE can map and track wireless clients but is unable to track RSSI-based RFID tags. What is the most likely cause of this problem?

A. NMSP is incorrectly configured between Cisco WCS and Cisco MSE. B. License is not installed on Cisco MS C. Tags are not compatible with Cisco Compatible Extensions. D. The Cisco WLC RFID tracking needs to be enabled. E. The Cisco WLC RFID timeout needs a configuration change. F. Tags are multicasting and not associating.

Correct Answer: C

Question 8

Which two statements describe the difference between a Cisco WGB and a universal WGB in a wireless network? (Choose two.)

A. Cisco WGB associates using one of the wired client MAC addresses. B. Universal WGB associates using one of the wired client MAC addresses. C. Universal WGB associates with its own MAC address on behalf of its wired clients. D. Cisco WGB associates with its own MAC address on behalf of its wired clients.

Correct Answer: B,D

Question 9

Refer to the exhibit.

What does the count of 62 for Handoff Requests Ignored represent in the Mobility Statistics output?

A. the number of handoff requests that were denied because the handoff period was too short (3 seconds) B. the number of handoff requests or client announcements that were ignored because the controller had no knowledge of that client C. the number of anchor requests that were ignored because the session closed on the current anchor and transferred the anchor back to the requestor D. the number of handoff responses that were denied

Correct Answer: B

Question 10

Which component of a Cisco wireless mesh network ensures maximum network
availability?

A. AWPP B. CAPWAP C. Cisco WCS D. Cisco 3300 Series MSE E. Cisco WLC

Correct Answer: A

Question 11

What is the default minimum requirement for location tracking of a device?

A. four APs at better than -75 dBm B. four APs at better than -70 dBm C. four APs at better than -67 dBm D. three APs at better than -70 dBm E. three APs at better than -80 dBm F. three APs at better than -75 dBm G. three APs at better than -67 dBm

Correct Answer: F

Question 12

Controllers WLC_1 and WLC_2 are in different mobility domains. A wireless client that has the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming?

A. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. B. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. C. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller. D. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller.

Correct Answer: C

Question 13

What is the purpose of network design synchronization between Cisco WCS v7.0 and the Cisco 3300 Series MSE?

A. update client and map information B. update controller and map information C. update map and AP information D. update controller and AP information

Correct Answer: C

Question 14

An engineer has found that the many of the access points are going offline after 21:00 everyday, then recover the following morning at 7:00. What menu would lead the engineer to the resolution of this issue in WCS?

A. Configure - Access Points B. Services - Mobility Services C. Services - Synchronize Services D. Configure - Scheduled Configuration Tasks

Correct Answer: D

Cisco Implementing Cisco Unified Wireless Mobility Services (IUWMS v2.0) - 642-747 Exam Practice Test