3605 by Avaya Valid Free Exam Practice Test

Question 1

Refer to the exhibit.
A campus network has been established with four Ethernet Routing Switch (ERS) 8600 switches in a switch cluster, two pairs with an Inter Switch Trunks (IST) running Split Multi Link Trunk (SMLT) and Routed Split Multi-Link Trunking (RSMLT). The traffic filters are required to block specific source IP addresses to be forwarded through the core. With reference to the exhibit, how should these filters be set up?

A. Configure the filters on the 1ST first before any other ports. B. Configure and apply all the filters on the two core IST links only C. Apply the filters to all ports that receive traffic from outside the immediate switch cluster. D. Configure the filters on the ports first and then the IST.

Correct Answer: C

Question 2

A university campus network consists of an Ethernet Routing
Switch (ERS) 8000 and Ethernet
switches.
Recently
they implemented
Routed Split
Multi-Link Trunking (RSMLT) over a split Multi- Link Trunk (SMLT) configuration. What is the advantage of implementing RSMLT over SMLT?

A. RSMLT extends fast failover benefits to the routed portion of the network. B. RSMLT increases the distance of the SMLT core. C. RSMLT allows the addition new users in a separate building. D. RSMLT achieves better data distribution across the SMLT.

Correct Answer: A

Question 3

The Ethernet routing switch (ERS) 5000 switches are being upgraded and it appears that a license is not recognized on the switch. Which two statements are valid
sources
of
information
that will help
resolve
the
license
installation? (Choose two.)

A. Use the show license command to get the license installation status B. Check the record of MSG address changes C. Use the show license file command to get the license installation status. D. Check for an 'invalid license fife' log report E. Check to see if the MAC address is correct in the license file.

Correct Answer: A,E

Question 4

When multiple VLANs are used, Dynamic Host Control Protocol (DHCP) relay is
required to get the DHCP information from the end user VLAN DHCP server.
Which statement about how to enable DHCP relay is true?

A. The physical VLAN IP address is configured as the DHCP relay agent on each VLAN requiring a DHCP relay. B. The IP address of the DHCP server is configured as the relay agent globally on all switches that do not directly attach to the DHCP server. C. The DHCP relay is configured globally and is automatically applied to all VLANs requiring a DHCP relay. D. The MAC address of the DHCP server configured as the DHCP relay agent on each VLAN requiring the DHCP relay agent.

Correct Answer: A

Question 5

1ST
configuration using the
show mlt
ist info command, which IP
address should be in the
IP ADDRESS column?

A. the IP address of the ISTVLAN on the local switch B. the management IP address of the peer switch C. the IP address of the IST VL AN on the peer switch . the IP address of the IST on the peer switch

Correct Answer: C

Question 6

The edge has been configured; the core configuration can be verified. Which configuration is the last step in the verification process?

A. SLPP configuration check B. Ext CP limit configuration check C. VLACP configuration check D. MLT configuration check

Correct Answer: A

Question 7

A technician is configuring
an InterSwitch
Frank
(IST)
for
Spilt Multi-Link Franking (SMLT). Which statement about how the IST is addressed is true?

A. Configure the IP address of the VLAN that was created for the IST. B. Configure the MAC addresses of the switches on each end of the IST. C. Configure the IP address of the ports that comprise the IST. D. No address configurations are required when configuring an IST.

Correct Answer: A

Question 8

A technician is configuring an Ethernet routing switch (ERS)-24T-PWR, and to add ports 10 through 20 to VLAN 100. Which ACLI command is used to accomplish this task?

A. 5520-24-PWR (config) # vlan 100 add members 10-20 B. 5520-24-PWR (config-vlan) # members add 100 10-20 C. 5520-24-PWR (config-if) #vlan 100 add members 10-20 D. 5520-24-PWR (config) # vlan members add 100 10-20

Correct Answer: D

Avaya Ethernet Routing Switch Implementation and Maintenance - 3605 Exam Practice Test