CWDP-303 by CWNP Valid Free Exam Practice Test

Question 1

When deploying a new WLAN infrastructure using PoE to power the APs, you realize that a known good AP is not powering up. You use the same cable to connect your laptop and connect without any trouble. What is the most likely reason the AP did not power up?

A. Layer 3 routing B. Spanning-tree convergence C. Missing AP licenses in the controller D. Lack of PoE budget on the switch

Correct Answer: D

Question 2

Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room.
When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you're able to see the SSID. What is the most likely cause of this problem?

A. Their laptops are SISO clients B. The customer laptop does not support Transmit Beamforming C. The AP is on channel 144 D. The AP is configured to use channel 36

Correct Answer: B

Question 3

In high-density environments, such as stadiums and convention centers, what extra factor has to be taken into account that can attenuate Wi-Fi signals when these environments are having an event?

A. Thick walls B. Fire doors C. People D. I-Beams

Correct Answer: C

Question 4

You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?

A. Reboot the server B. Verify that the shared secret between the authenticator and the RADIUS server is correct C. Reboot the clients D. Restart the RADIUS service

Correct Answer: B

Question 5

An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput. What is the most likely cause of this result?

A. The clients were not upgraded B. APs are mounted on the wall C. APs are transmitting at a low transmit power D. The APs are still using the 5 GHz lower band

Correct Answer: C

Question 6

You're preparing to perform a site survey for a company that processes meat. Some areas are restricted due to high-security. What do you have to do in order to proceed with the site survey?

A. Gain appropriate access and clearance to perform the site survey. B. Just begin the survey, they will understand C. Gain meat processing access certification from the FDA. D. Ensure that you and your team are using food industry approved USB adapters for the survey.

Correct Answer: A

CWNP Certified Wireless Design Professional - CWDP-303 Exam Practice Test